Other Name: Absorber - Suspension; Rear Shock Absorber; Strut and Coil Spring Assembly Kit; Complete Strut.; Shock; Shock Absorber Suspension Rear
Position: Rear
Item Weight: 5.40 Pounds
Item Dimensions: 22.8 x 6.2 x 4.5 inches
Condition: New
Fitment Type: Direct Replacement
Require Quantity: 2
SKU: 68020856AB
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2008 Dodge Dakota Submodels:
Big Horn, Laramie, Lone Star, SLT, ST, SXT, Sport, TRX, TRX4 | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX
2008 Dodge Dakota Shock Absorber Parts and Q&A
Q: How to Detach the Front Shock Absorber on 2008 Dodge Dakota?
A: First, you will need to loosen and take out the upper shock nuts. After that, lift and hold the vehicle with jack stands before you remove the tire and wheel set. After that, take out the bolts for the disc brake caliper and remove the wheel speed sensor routing clip. Take off the upper ball joint nut and then use special tool 8677 to remove the ball joint from the knuckle. Support the lower control arm outboard side, then remove the nut from the stabilizer link and detach it from the lower control arm to get to the lower shock nut. After that, unscrew the lower shock bolt and nut, then carefully pull out the shock.