How to Install New Brake Pads on 2009 Dodge Durango?

Drive the brake pistons all the way in before installing the new brake pads by putting an old brake shoe between the piston and the C-clamp you are holding down over the piston. First, tidy up the caliper mounting adapter and then anti-rattle springs and remember to coat them with Mopar brake grease, since these springs are not the same as others. Attach the anti-rattle springs first beneath the suspension, then above the suspension on top. Install the inboard brake shoe in the adapter and following that, add the outboard brake shoe. Place the top of the caliper over the rotor and slot it below the adapter, then push down the caliper's bottom onto the adapter. After that, place the caliper on and secure the wheel and tire assembly. Afterwards, lower the vehicle. Disconnect the 12 volt battery system ground isolation connector (1) when the vehicle comes with a 5.7L HEV. Press the brakes several times until the caliper pistons and brake shoes securely fit, give the pedal a solid feel and then top off the master cylinder fluid.

OEM 2009 Dodge Durango Brake Pad

Disc Brake Pad Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Brake Pads found

View related parts
2009 Dodge Durango Brake Pads, Front Part Number: 68334862AB
$126.90 MSRP: $189.00
You Save: $62.10 (33%)
ADD TO CART
Product Specifications
- Other Name: Pad Kit - Front Disc Brake; Disc Brake Pad Set, Front; Disc Brake Hardware Kit; Disc Brake Pad Kit; Front Pads; Pad Kit Front Disc Brake
- Position: Front
- Replaces: 5143350AB, 5143350AC, 68334862AA
- Item Weight: 6.70 Pounds
- Item Dimensions: 8.7 x 5.3 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68334862AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Durango Submodels:
- Adventurer, Limited, Limited Hybrid, SE, SLT, SXT | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
2009 Dodge Durango Brake Pads, Rear Part Number: 68334863AB
$88.20 MSRP: $132.00
You Save: $43.80 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shoe Kit - Rear Disc Brake; Rear Pads
- Position: Rear
- Item Weight: 3.70 Pounds
- Item Dimensions: 3.1 x 5.4 x 8.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68334863AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Durango Submodels:
- Adventurer, Limited, Limited Hybrid, SE, SLT, ST, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
2009 Dodge Durango Brake Pads, Front Part Number: 1BP00284AA
$55.36 MSRP: $75.00
You Save: $19.64 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit - Front Disc Brake
- Position: Front
- Replaces: 2AMV1350AB, V1013350AC, V1013550AA, 2AMV1350AC, 2AMV1350AA, V1013350
- Item Weight: 33.30 Pounds
- Item Dimensions: 15.5 x 10.1 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1BP00284AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Durango Submodels:
- Adventurer, Limited, Limited Hybrid, SE, SLT, SXT | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
2009 Dodge Durango Brake Pads, Rear Part Number: 1BP00302AA
$23.20 MSRP: $33.35
You Save: $10.15 (31%)
Product Specifications
- Other Name: Shoe Kit - Rear Disc Brake
- Position: Rear
- Replaces: V2010563
- Item Weight: 35.00 Pounds
- Item Dimensions: 15.3 x 10.5 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1BP00302AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Durango Submodels:
- Adventurer, Limited, Limited Hybrid, SE, SLT, SXT | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS

2009 Dodge Durango Brake Pad Parts and Q&A

Q: How to Install New Brake Pads on 2009 Dodge Durango?
A: Drive the brake pistons all the way in before installing the new brake pads by putting an old brake shoe between the piston and the C-clamp you are holding down over the piston. First, tidy up the caliper mounting adapter and then anti-rattle springs and remember to coat them with Mopar brake grease, since these springs are not the same as others. Attach the anti-rattle springs first beneath the suspension, then above the suspension on top. Install the inboard brake shoe in the adapter and following that, add the outboard brake shoe. Place the top of the caliper over the rotor and slot it below the adapter, then push down the caliper's bottom onto the adapter. After that, place the caliper on and secure the wheel and tire assembly. Afterwards, lower the vehicle. Disconnect the 12 volt battery system ground isolation connector (1) when the vehicle comes with a 5.7L HEV. Press the brakes several times until the caliper pistons and brake shoes securely fit, give the pedal a solid feel and then top off the master cylinder fluid.