How to Install the Front Cross-Member and Rear Crossmember on 2009 Dodge Durango?

First of all, install the crossmember (2). Next screw it with bolts (1) and nuts (3). Finally, looseness of the bolts and nuts should be tightened to the torque specification of 102 Nm (75 ft. lbs.).

OEM 2009 Dodge Durango Front Cross-Member

Front Engine Cross Member

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Front Cross-Member found

View related parts
2009 Dodge Durango Crossmember, Front Part Number: 52113572AA
Product Specifications
- Other Name: Crossmember - Front Suspension; Torsion Bar Mount, Front; Crossmember Front Suspension
- Position: Front
- Item Weight: 14.80 Pounds
- Item Dimensions: 34.7 x 6.3 x 3.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52113572AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Durango Submodels:
- Adventurer, Limited, Limited Hybrid, SE, SLT, ST, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS

2009 Dodge Durango Front Cross-Member Parts and Q&A

Q: How to Install the Front Cross-Member and Rear Crossmember on 2009 Dodge Durango?
A: First of all, install the crossmember (2). Next screw it with bolts (1) and nuts (3). Finally, looseness of the bolts and nuts should be tightened to the torque specification of 102 Nm (75 ft. lbs.).