How to Install the Grille and Upper Radiator Shroud on 2009 Dodge Durango?

Before installing the grille, do not use a hammer or mallet on the upper radiator shroud push pins to keep the grille from getting damaged. Put the grille in place before affixing the four screws, each to a tightness of 13 Nm (10 ft. lbs.). After that, install the top four screws and secure them with 13 Nm (10 ft. lbs.). Secure the upper radiator shroud to the car after the grille is in place and hook up the push pins for basic assembly. After that, put the front fascia back on.

OEM 2009 Dodge Durango Grille

Front Grille

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Grille found

View related parts
2009 Dodge Durango Grille, Front Part Number: 55078015AD
$699.58 MSRP: $920.00
You Save: $220.42 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Grille - Radiator; Grille, Front; Grille Radiator
- Position: Front
- Item Weight: 12.90 Pounds
- Item Dimensions: 52.6 x 22.2 x 9.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55078015AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Durango Submodels:
- Adventurer, Limited, Limited Hybrid, SE, SLT, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS

2009 Dodge Durango Grille Parts and Q&A

Q: How to Install the Grille and Upper Radiator Shroud on 2009 Dodge Durango?
A: Before installing the grille, do not use a hammer or mallet on the upper radiator shroud push pins to keep the grille from getting damaged. Put the grille in place before affixing the four screws, each to a tightness of 13 Nm (10 ft. lbs.). After that, install the top four screws and secure them with 13 Nm (10 ft. lbs.). Secure the upper radiator shroud to the car after the grille is in place and hook up the push pins for basic assembly. After that, put the front fascia back on.