How to Service and Repair a Front Wiper Arm on 2009 Dodge Grand Caravan?

Open the hood and, while being careful, pry off the plastic nut cap (3) attached to the wiper arm's pivot end (2). After that, take out nut (4) holding the wiper arm to the shaft and ensure the hood is fully closed. Pull up on the front wiper arm so that it is completely in its over-center position to hold the wiper blade (1) off the glass above the windshield. Slide the front wiper arm slightly up and down to disconnect it from the pivot shaft and pull the arm away. Removing the front wiper arm using a battery terminal puller should only be done if all else fails, because it can damage the wiper arm. If moving the blade back and forth doesn't loosen the wiper arm from the shaft, put the wiper blade back down on the window and raise the hood once more. At the end, take off the wiper arm from the pivot shaft (2) by using a proper battery terminal puller (3).

OEM 2009 Dodge Grand Caravan Wiper Arm

Windshield Wiper Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Wiper Arms found

View related parts
2009 Dodge Grand Caravan Wiper Arm Assembly, Front Passenger Side Part Number: 68028438AA
$121.23 MSRP: $180.00
You Save: $58.77 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Wiper - Front Wiper; Windshield Wiper Arm, Right; Front Arm; Arm Front Wiper; Wiper Arm
- Position: Front Passenger Side
- Item Weight: 1.60 Pounds
- Item Dimensions: 32.2 x 4.1 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68028438AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Grand Caravan Submodels:
- American Value Package, C/V, Crew, Express, GT, Mainstreet, R/T, SE, SE 30th Anniversary Edition, SE Plus, SXT, SXT 30th Anniversary Edition | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
2009 Dodge Grand Caravan Wiper Arm, Rear Part Number: 68028437AA
$22.04 MSRP: $31.70
You Save: $9.66 (31%)
Product Specifications
- Other Name: Arm Wiper - Rear Wiper; Back Glass Wiper Arm; Rear Arm; Arm Rear Wiper
- Position: Rear
- Item Weight: 1.50 Pounds
- Item Dimensions: 12.2 x 1.8 x 1.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68028437AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Grand Caravan Submodels:
- C/V, SE, SXT | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
2009 Dodge Grand Caravan Wiper Arm Assembly, Front Driver Side Part Number: 68028439AA
Product Specifications
- Other Name: Arm Wiper - Front Wiper; Windshield Wiper Arm, Left; Front Arm; Arm Front Wiper; Wiper Arm
- Position: Front Driver Side
- Item Weight: 1.60 Pounds
- Item Dimensions: 29.4 x 3.1 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68028439AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Grand Caravan Submodels:
- C/V, Crew, Express, Mainstreet, R/T, SE, SXT | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS

2009 Dodge Grand Caravan Wiper Arm Parts and Q&A

Q: How to Service and Repair a Front Wiper Arm on 2009 Dodge Grand Caravan?
A: Open the hood and, while being careful, pry off the plastic nut cap (3) attached to the wiper arm's pivot end (2). After that, take out nut (4) holding the wiper arm to the shaft and ensure the hood is fully closed. Pull up on the front wiper arm so that it is completely in its over-center position to hold the wiper blade (1) off the glass above the windshield. Slide the front wiper arm slightly up and down to disconnect it from the pivot shaft and pull the arm away. Removing the front wiper arm using a battery terminal puller should only be done if all else fails, because it can damage the wiper arm. If moving the blade back and forth doesn't loosen the wiper arm from the shaft, put the wiper blade back down on the window and raise the hood once more. At the end, take off the wiper arm from the pivot shaft (2) by using a proper battery terminal puller (3).