How to Correctly Install Wiper Arms on 2010 Dodge Grand Caravan?

Before installing the wiper arms, park the wiper motor by turning the ignition on and then turn off the multi-function switch control knob. When the wiper pivots don't move anymore, switch the ignition switch back to the OFF position. Whenever the motor is in park, the indexing of the front wiper arms to the pivot shafts is necessary. attach the wiper arm pivot end to the wiper pivot shaft so the bottom edge of the wiper blade is right above the horizontal T marks toward the upper corner of the lower windshield blackout zone. Pull upward on the wiper arm a little to release the tension in the springs and then press the end of the wiper pivot handle down uniformly onto the pivot shaft. Secure the wiper arm's nut to the pivot shaft by turning it at 26 Nm (19 ft. lbs.). Wet the glass and use the wipers and then turn the wiper switch to OFF so you can readjust the wipers as necessary. After you are done, put the plastic nut cap back onto the pivot nut.

OEM 2010 Dodge Grand Caravan Wiper Arm

Windshield Wiper Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Wiper Arms found

View related parts
2010 Dodge Grand Caravan Wiper Arm Assembly, Front Passenger Side Part Number: 68028438AA
$121.23 MSRP: $180.00
You Save: $58.77 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Wiper - Front Wiper; Windshield Wiper Arm, Right; Front Arm; Arm Front Wiper; Wiper Arm
- Position: Front Passenger Side
- Item Weight: 1.60 Pounds
- Item Dimensions: 32.2 x 4.1 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68028438AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Grand Caravan Submodels:
- American Value Package, C/V, Crew, Express, GT, Mainstreet, R/T, SE, SE 30th Anniversary Edition, SE Plus, SXT, SXT 30th Anniversary Edition | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
2010 Dodge Grand Caravan Wiper Arm, Rear Part Number: 68028437AA
$22.04 MSRP: $31.70
You Save: $9.66 (31%)
Product Specifications
- Other Name: Arm Wiper - Rear Wiper; Back Glass Wiper Arm; Rear Arm; Arm Rear Wiper
- Position: Rear
- Item Weight: 1.50 Pounds
- Item Dimensions: 12.2 x 1.8 x 1.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68028437AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Grand Caravan Submodels:
- C/V, SE, SXT | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
2010 Dodge Grand Caravan Wiper Arm Assembly, Front Driver Side Part Number: 68028439AA
Product Specifications
- Other Name: Arm Wiper - Front Wiper; Windshield Wiper Arm, Left; Front Arm; Arm Front Wiper; Wiper Arm
- Position: Front Driver Side
- Item Weight: 1.60 Pounds
- Item Dimensions: 29.4 x 3.1 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68028439AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Grand Caravan Submodels:
- C/V, Crew, Express, Mainstreet, R/T, SE, SXT | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS

2010 Dodge Grand Caravan Wiper Arm Parts and Q&A

Q: How to Correctly Install Wiper Arms on 2010 Dodge Grand Caravan?
A: Before installing the wiper arms, park the wiper motor by turning the ignition on and then turn off the multi-function switch control knob. When the wiper pivots don't move anymore, switch the ignition switch back to the OFF position. Whenever the motor is in park, the indexing of the front wiper arms to the pivot shafts is necessary. attach the wiper arm pivot end to the wiper pivot shaft so the bottom edge of the wiper blade is right above the horizontal T marks toward the upper corner of the lower windshield blackout zone. Pull upward on the wiper arm a little to release the tension in the springs and then press the end of the wiper pivot handle down uniformly onto the pivot shaft. Secure the wiper arm's nut to the pivot shaft by turning it at 26 Nm (19 ft. lbs.). Wet the glass and use the wipers and then turn the wiper switch to OFF so you can readjust the wipers as necessary. After you are done, put the plastic nut cap back onto the pivot nut.