How to Install a Knock Sensor on a 3.5L Engine on 2009 Dodge Journey?

Install the 3.5L knock sensor and tighten to 20 Nm (15 ft lb), using the specified torque to prevent altered performance or spark control. Route the knock sensor wiring correctly, install the upper intake manifold, connect the sensor's electrical connector, then reconnect the negative battery cable.

OEM 2009 Dodge Journey Knock Sensor

Engine Knock Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Knock Sensors found

View related parts
2009 Dodge Journey Knock Sensor Part Number: 4606093AD
$103.54 MSRP: $157.00
You Save: $53.46 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Detonation; Ignition Knock (Detonation) Sensor; Sensor; Sensor Detonation
- Replaces: 4606093
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.3 x 2.7 x 8.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4606093AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Journey Submodels:
- Crew, R/T, SXT | 6 Cyl 3.5 L GAS
View related parts
2009 Dodge Journey Knock Sensor Part Number: 5033316AB
$128.23 MSRP: $194.00
You Save: $65.77 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Knock; Ignition Knock (Detonation) Sensor; MAP Sensor; Sensor Knock
- Replaces: 5033316AA, 56028563AA
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.1 x 1.3 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5033316AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Journey Submodels:
- AVP, Base, Crossroad, Express, SE, SE Value, SXT | 2.4L L4, 4 Cyl 2.4 L GAS

2009 Dodge Journey Knock Sensor Parts and Q&A

Q: How to Install a Knock Sensor on a 3.5L Engine on 2009 Dodge Journey?
A: Install the 3.5L knock sensor and tighten to 20 Nm (15 ft lb), using the specified torque to prevent altered performance or spark control. Route the knock sensor wiring correctly, install the upper intake manifold, connect the sensor's electrical connector, then reconnect the negative battery cable.