How to Install the MAP Sensor for a 3.5L Engine on 2009 Dodge Journey?

To install the Manifold Pressure/Vacuum Sensor on the 3.5L engine, first position the sensor, then connect the electrical connector (1) to it (2). Lastly, reconnect the negative battery cable and tighten the nut to 5 Nm (45 in. lbs.).

OEM 2009 Dodge Journey MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 MAP Sensors found

View related parts
2009 Dodge Journey M.A.P. Sensor Part Number: 5033310AB
$69.00 MSRP: $102.00
You Save: $33.00 (33%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; MAP Sensor; Sensor Map; Pressure Sensor
- Replaces: 5149092AA
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.9 x 2.6 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5033310AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Journey Submodels:
- AVP, Base, Crossroad, Express, SE, SXT | 4 Cyl 2.4 L GAS
View related parts
2009 Dodge Journey M.A.P. Sensor Part Number: 68199324AB
$61.94 MSRP: $84.25
You Save: $22.31 (27%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; MAP Sensor; Sensor Map; Pressure Sensor
- Replaces: 5033310AC, 68199324AA, 5149091AA
- Item Weight: 0.70 Pounds
- Item Dimensions: 8.4 x 6.3 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68199324AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Journey Submodels:
- Crew, R/T, SXT | 2.7L V6, 3.5L V6, 6 Cyl 3.5 L GAS

2009 Dodge Journey MAP Sensor Parts and Q&A

Q: How to Install the MAP Sensor for a 3.5L Engine on 2009 Dodge Journey?
A: To install the Manifold Pressure/Vacuum Sensor on the 3.5L engine, first position the sensor, then connect the electrical connector (1) to it (2). Lastly, reconnect the negative battery cable and tighten the nut to 5 Nm (45 in. lbs.).