How to Service and Repair a Neutral Safety Switch on 2009 Dodge Journey?

Take out the valve body first to service or repair the Transmission Range Sensor. After that, take out the park rod assembly from the TRS/rooster comb. First, set the allen wrench at the manual lever's set screw and release it; next, remove the roll pin at the TRS/rooster comb with a pin punch. After that, release the manual lever from the case and evaluate the bushing. Remove the TRS/rooster comb from the case after that and then remove the manual lever seal.

OEM 2009 Dodge Journey Neutral Safety Switch

Transmission Neutral Safety Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Neutral Safety Switch found

View related parts
2009 Dodge Journey Neutral Safety Switch Part Number: 4659676AC
$62.61 MSRP: $93.90
You Save: $31.29 (34%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Transmission Range; Range Sensor; Parking Brake Warning Switch; Sensor Transmission Range
- Replaced by: 4659676AD
- Replaces: 4659676AB, 4659676
- Item Weight: 0.80 Pounds
- Item Dimensions: 4.2 x 4.0 x 6.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4659676AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Journey Submodels:
- AVP, Base, Crew, Crossroad, Express, GT, Limited, Lux, Mainstreet, R/T, SE, SE Value, SXT | 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX

2009 Dodge Journey Neutral Safety Switch Parts and Q&A

Q: How to Service and Repair a Neutral Safety Switch on 2009 Dodge Journey?
A: Take out the valve body first to service or repair the Transmission Range Sensor. After that, take out the park rod assembly from the TRS/rooster comb. First, set the allen wrench at the manual lever's set screw and release it; next, remove the roll pin at the TRS/rooster comb with a pin punch. After that, release the manual lever from the case and evaluate the bushing. Remove the TRS/rooster comb from the case after that and then remove the manual lever seal.