How to Service and Repair the Right Front Brake Line on 2009 Dodge Nitro?

Install line/hose 4 as your first step, then secure brake hose banjo bolt 3 at the caliper. Fasten the wheel speed sensor clips 1 back to the hose 4 and then secure the wheel and tire assembly afterward. Secure the vehicle so it is level, then add the mounting clips to the studs 1. After that, hook up the brake line to the HCU and attach the air box assembly. Attach the electrical wires to the body control module on the fender and then pull out the prop rod from the brake pedal. When the job is complete, perform a last bleed of the area that was repaired: if the pedal does not feel right after this, using a base bleed method is needed.

OEM 2009 Dodge Nitro Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Brake Lines found

View related parts
2009 Dodge Nitro Flex Hose, Rear Passenger Side Part Number: 52109854AF
$63.11 MSRP: $94.60
You Save: $31.49 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube/Hose - Brake; Brake Hydraulic Hose, Rear Right; Brake Hose; Brake Line; Tube And Hose Brake Union To Right Caliper; Hydraulic Hose
- Position: Rear Passenger Side
- Replaces: 52109854AD, 52109854AE
- Item Weight: 1.00 Pounds
- Item Dimensions: 19.1 x 18.9 x 4.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52109854AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Nitro Submodels:
- Detonator, Heat, R/T, SE, SLT, SXT, Shock | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2009 Dodge Nitro Flex Hose, Front Driver Side Part Number: 52109851AF
$237.58 MSRP: $362.00
You Save: $124.42 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube/Hose - Brake; Brake Hydraulic Hose, Front Left; Hydraulic Hose; Brake Hose; Brake Line
- Position: Front Driver Side
- Replaces: 52109851AD, 52109851AE
- Item Weight: 0.80 Pounds
- Item Dimensions: 32.3 x 3.4 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52109851AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Nitro Submodels:
- Detonator, Heat, R/T, SE, SLT, SXT, Shock | 3.7L V6, 4.0L V6, 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2009 Dodge Nitro Flex Hose Part Number: 52109852AG
$263.55 MSRP: $351.00
You Save: $87.45 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube/Hose - Brake; Brake Hose
- Replaces: 52109852AE, 52109852AF
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52109852AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2009 Dodge Nitro Submodels:
- Detonator, Heat, R/T, SE, SLT, SXT, Shock | 3.7L V6, 4.0L V6, 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2009 Dodge Nitro Flex Hose, Rear Driver Side Part Number: 52109855AG
Product Specifications
- Other Name: Tube/Hose - Brake; Brake Hydraulic Hose, Rear Left; Hydraulic Hose; Brake Hose; Brake Line
- Position: Rear Driver Side
- Replaces: 52109855AE, 52109855AF, 52109855AD
- Item Weight: 2.20 Pounds
- Item Dimensions: 102.0 x 28.3 x 10.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52109855AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Nitro Submodels:
- Detonator, Heat, R/T, SE, SLT, SXT, Shock | 3.7L V6, 4.0L V6, 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS

2009 Dodge Nitro Brake Line Parts and Q&A

Q: How to Service and Repair the Right Front Brake Line on 2009 Dodge Nitro?
A: Install line/hose 4 as your first step, then secure brake hose banjo bolt 3 at the caliper. Fasten the wheel speed sensor clips 1 back to the hose 4 and then secure the wheel and tire assembly afterward. Secure the vehicle so it is level, then add the mounting clips to the studs 1. After that, hook up the brake line to the HCU and attach the air box assembly. Attach the electrical wires to the body control module on the fender and then pull out the prop rod from the brake pedal. When the job is complete, perform a last bleed of the area that was repaired: if the pedal does not feel right after this, using a base bleed method is needed.