How to Install a Yaw Sensor on 2009 Dodge Nitro?

Install the dynamics sensor (2) to the vehicle. Connect the electrical connector (3) to the sensor (2). Next, screw the installation together with two retaining nuts (1): screw them to 9 Nm (80 in. lbs.). Finally, fit the floor console.

OEM 2009 Dodge Nitro Yaw Sensor

Yaw Rate Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Yaw Sensors found

View related parts
2009 Dodge Nitro Control Module Part Number: 56029466AA
$132.54 MSRP: $255.00
You Save: $122.46 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Dynamics; Sensor Dynamics Lateral Acceleration And Yaw Rate
- Item Weight: 1.40 Pounds
- Item Dimensions: 4.6 x 5.3 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56029466AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Nitro Submodels:
- Detonator, Heat, R/T, SE, SLT, SXT, Shock | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2009 Dodge Nitro Control Module Part Number: 56029485AA
$135.69 MSRP: $215.00
You Save: $79.31 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Dynamics; Sensor Dynamics Lateral Acceleration And Yaw Rate
- Item Weight: 4.40 Pounds
- Item Dimensions: 8.2 x 3.8 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56029485AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Nitro Submodels:
- Detonator, Heat, R/T, SE, SLT, SXT, Shock | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS

2009 Dodge Nitro Yaw Sensor Parts and Q&A

Q: How to Install a Yaw Sensor on 2009 Dodge Nitro?
A: Install the dynamics sensor (2) to the vehicle. Connect the electrical connector (3) to the sensor (2). Next, screw the installation together with two retaining nuts (1): screw them to 9 Nm (80 in. lbs.). Finally, fit the floor console.