JeepParts
My Garage
My Account
Cart
OEM 2009 Dodge Nitro Harmonic Balancer
Engine Harmonic Balancer- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Harmonic Balancers found
2009 Dodge Nitro Crankshaft Damper Part Number: 4892271AA
Product Specifications- Other Name: Damper - Crankshaft; Harmonic Balancer Puller; Harmonic Balancer; Pulley; Damper Crankshaft
- Item Weight: 8.00 Pounds
- Item Dimensions: 8.1 x 8.3 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4892271AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2009 Dodge Nitro Vibration Damper Part Number: 53020689AB
Product Specifications- Other Name: Damper - Crankshaft; Harmonic Balancer Puller; Harmonic Balancer; Crankshaft Damper; Pulley; Damper Crankshaft
- Item Weight: 10.90 Pounds
- Item Dimensions: 10.5 x 10.4 x 6.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53020689AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2009 Dodge Nitro Harmonic Balancer Parts and Q&A
- Q: How is the Harmonic Balancer Installed on 2009 Dodge Nitro?A: Before installing the harmonic balancer, clean both the harmonic balancer bore and the crankshaft nose so no damage occurs to the crankshaft, harmonic balancer, or Special Tool 8512A. Put the crankshaft harmonic balancer slot over the crankshaft key and slide it a little bit on the crankshaft. The Harmonic Balancer Installer 8512A is assembled by threading the nut onto the shaft, setting the roller bearing (1) onto the threaded rod (3) so the hardened side is facing the nut and placing the hardened washer onto the rod. Cover the threads on the threaded rod using Mopar(R) Nickel Anti-Seize or Loctite No. 771. Press the harmonic balancer onto the crankshaft with the Harmonic Balancer Installer 8512A and then install and tighten the crankshaft harmonic balancer bolt to 175 Nm (130 ft. lbs.). Following, fit the accessory drive belt, then join the negative cable to the battery.
Related 2009 Dodge Nitro Parts
2009 Dodge Nitro Dipstick
2009 Dodge Nitro Timing Belt
2009 Dodge Nitro Crankshaft
2009 Dodge Nitro Crankshaft Pulley
2009 Dodge Nitro Cylinder Head
2009 Dodge Nitro Lash Adjuster
2009 Dodge Nitro Oil Pan Gasket
2009 Dodge Nitro Oil Pump Gasket
2009 Dodge Nitro Rocker Arm Pivot
2009 Dodge Nitro Rod Bearing
2009 Dodge Nitro Timing Cover
2009 Dodge Nitro Transmission Mount