How to Service and Repair a Harmonic Balancer on 2008 Dodge Nitro?

Before fixing or servicing the harmonic balancer and crankshaft pulley, first take the battery cable off of the negative terminal. Then, take out the accessory drive belt and observe that the transmission cooler line is snapped into the shroud in the lower right corner. Afterward, unscrew the crankshaft harmonic balancer bolt and show Two Jaw Puller and Crankshaft Insert 8513A removing the harmonic balancer.

OEM 2008 Dodge Nitro Harmonic Balancer

Engine Harmonic Balancer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Harmonic Balancers found

View related parts
2008 Dodge Nitro Crankshaft Damper Part Number: 4892271AA
Product Specifications
- Other Name: Damper - Crankshaft; Harmonic Balancer Puller; Harmonic Balancer; Pulley; Damper Crankshaft
- Item Weight: 8.00 Pounds
- Item Dimensions: 8.1 x 8.3 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4892271AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Nitro Submodels:
- Detonator, Heat, R/T, SXT, Shock | 6 Cyl 4.0 L GAS
View related parts
2008 Dodge Nitro Vibration Damper Part Number: 53020689AB
Product Specifications
- Other Name: Damper - Crankshaft; Harmonic Balancer Puller; Harmonic Balancer; Crankshaft Damper; Pulley; Damper Crankshaft
- Item Weight: 10.90 Pounds
- Item Dimensions: 10.5 x 10.4 x 6.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53020689AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Nitro Submodels:
- Heat, SE, SLT, SXT | 6 Cyl 3.7 L GAS

2008 Dodge Nitro Harmonic Balancer Parts and Q&A

Q: How to Service and Repair a Harmonic Balancer on 2008 Dodge Nitro?
A: Before fixing or servicing the harmonic balancer and crankshaft pulley, first take the battery cable off of the negative terminal. Then, take out the accessory drive belt and observe that the transmission cooler line is snapped into the shroud in the lower right corner. Afterward, unscrew the crankshaft harmonic balancer bolt and show Two Jaw Puller and Crankshaft Insert 8513A removing the harmonic balancer.