How to Install a Seat Heater to Prevent Premature Failure on 2009 Dodge Nitro?

Always avoid folding or creasing the heating element assembly during installation since it may cause the element to fail early on. Take off the adhesive backing from the new heating element to get ready 2. Stick the new element onto the cushion, following the marks left by the sticker from the old element. After that, link the heating element connectors 3 and 4 and plug back in the negative battery cable. After that, check that the heated seat system is working correctly. Set the heated seat wire harness to pass correctly under the seat and seat back and make sure any extra wire is tucked in between the back of the seat cushion foam and the flap of the seat cushion cover. After that, fit the seat cushion or seat back cover as per the manufacturer's instructions.

OEM 2009 Dodge Nitro Seat Heater

Seat Warmer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Seat Heaters found

View related parts
2009 Dodge Nitro Seat Cushion Heater, Front Lower Part Number: 4610093AA
Product Specifications
- Other Name: Pad - Front Seat Cushion; Seat Heater Pad, Front Lower; Element; Pad Front Seat Cushion Heating Element; Seat Heater
- Position: Front Lower
- Replaces: 68023280AA
- Item Weight: 0.80 Pounds
- Item Dimensions: 10.8 x 6.4 x 6.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4610093AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Nitro Submodels:
- Detonator, Heat, R/T, SE, SLT, SXT, Shock | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2009 Dodge Nitro Seat Back Heater, Front Upper Part Number: 4610240AA
Product Specifications
- Other Name: Pad - Front Seat Back; Seat Heater Pad, Front Upper; Element; Pad Front Seat Back Heater Element; Pad Front Seat Back Heater Pad; Pad Heater Seat Back; Seat Heater
- Position: Front Upper
- Replaces: 4610094AA
- Item Weight: 0.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4610240AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Nitro Submodels:
- R/T, SE, SLT, SXT | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2009 Dodge Nitro Seat Back Heater, Front Upper Part Number: 4610238AA
Product Specifications
- Other Name: Pad - Front Seat Back; Seat Heater Pad, Front Upper; Element; Pad Front Seat Back Heater Element; Pad Front Seat Back Heater Pad; Pad Heater Seat Back; Seat Heater
- Position: Front Upper
- Replaces: 4610086AA
- Item Weight: 0.90 Pounds
- Item Dimensions: 10.5 x 6.4 x 6.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4610238AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Nitro Submodels:
- Detonator, Heat, R/T, SE, SLT, SXT, Shock | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS

2009 Dodge Nitro Seat Heater Parts and Q&A

Q: How to Install a Seat Heater to Prevent Premature Failure on 2009 Dodge Nitro?
A: Always avoid folding or creasing the heating element assembly during installation since it may cause the element to fail early on. Take off the adhesive backing from the new heating element to get ready 2. Stick the new element onto the cushion, following the marks left by the sticker from the old element. After that, link the heating element connectors 3 and 4 and plug back in the negative battery cable. After that, check that the heated seat system is working correctly. Set the heated seat wire harness to pass correctly under the seat and seat back and make sure any extra wire is tucked in between the back of the seat cushion foam and the flap of the seat cushion cover. After that, fit the seat cushion or seat back cover as per the manufacturer's instructions.