How to Safely Extract the Crankshaft from an Engine on 2009 Dodge Ram 2500?

Take out the engine before continuing to remove the crankshaft. After that, install Crankshaft Insert 8513A and use Puller 1023 to remove the vibration damper. Following that, remove the rear oil seal retainer and then the oil pan. Uninstall both the oil pump pickup and the gasket underneath the windage tray/oil pan. After that, remove both the timing chain cover and the oil pump. Get rid of the timing chain and sprockets. Remove the caps marked as rod bearings and lift out the old bearings too. Likewise, figure out which bearing caps are the main ones before unbolting them and take out both the bearing caps and the bearings without removing all of them together. As the last step, take the thrust washers out and lift the crankshaft from its position in the block.

OEM 2009 Dodge Ram 2500 Crankshaft

Crank Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Crankshafts found

View related parts
2009 Dodge Ram 2500 Crankshaft Part Number: 68054213AA
$2989.03 MSRP: $4525.00
You Save: $1535.97 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaces: 5102117AB, 5175555AA, 5102117AA, 68000918AA
- Item Weight: 97.30 Pounds
- Item Dimensions: 41.7 x 10.7 x 9.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68054213AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Ram 2500 Submodels:
- Laramie, SLT, ST, Sport, TRX4 | 6 Cyl 5.9 L DIESEL
View related parts
2009 Dodge Ram 2500 Crankshaft Part Number: 53021302BB
$215.27 MSRP: $317.00
You Save: $101.73 (33%)
Product Specifications
- Other Name: Crankshft; Crankshaft See Note
- Item Weight: 61.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53021302BB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2009 Dodge Ram 2500 Submodels:
- Laramie, Power Wagon, SLT, ST, SXT | 8 Cyl 5.7 L GAS
View related parts
2009 Dodge Ram 2500 Crankshaft Part Number: 68003405AA
Product Specifications
- Item Weight: 154.80 Pounds
- Item Dimensions: 41.9 x 10.8 x 10.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68003405AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2009 Dodge Ram 2500 Submodels:
- Laramie, SLT, ST, SXT, TRX | 6 Cyl 6.7 L DIESEL

2009 Dodge Ram 2500 Crankshaft Parts and Q&A

Q: How to Safely Extract the Crankshaft from an Engine on 2009 Dodge Ram 2500?
A: Take out the engine before continuing to remove the crankshaft. After that, install Crankshaft Insert 8513A and use Puller 1023 to remove the vibration damper. Following that, remove the rear oil seal retainer and then the oil pan. Uninstall both the oil pump pickup and the gasket underneath the windage tray/oil pan. After that, remove both the timing chain cover and the oil pump. Get rid of the timing chain and sprockets. Remove the caps marked as rod bearings and lift out the old bearings too. Likewise, figure out which bearing caps are the main ones before unbolting them and take out both the bearing caps and the bearings without removing all of them together. As the last step, take the thrust washers out and lift the crankshaft from its position in the block.