Other Name: Seal - Crankshaft Oil; Front Engine Crankshaft Seal; Timing Cover Seal; Gasket; Crankshaft Seal; Front Seal included with Long Block Engine Install Kit.
Position: Front
Replaces: 53021585AB
Item Weight: 0.50 Pounds
Item Dimensions: 1.1 x 3.3 x 3.3 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 53021585AD
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
Other Name: Seal - Crankshaft Oil; Engine Crankshaft Seal, Front; Front Crank Seal; Outer Timing Cover Seal; Seal Crankshaft Oil Front; Crankshaft Seal
Position: Front
Item Weight: 0.50 Pounds
Item Dimensions: 3.4 x 3.5 x 0.7 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 68426385AA
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2009 Dodge Ram 3500 Submodels:
Base, Laramie, SLT, ST, SXT, Sport, TRX4 | 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL
Other Name: Retainer - Crankshaft Rear Oil Seal; Engine Crankshaft Seal, Rear; Rear Main Seal Retainer; Crankshaft Rear Oil Seal not included with Long Block Engine Install Kit.
Q: How to Remove the Front Crankshaft Seal on 2009 Dodge Ram 3500?
A: It is important to first remove the negative cable from the battery when trying to take out the front crankshaft seal. After that, take off the accessory drive belt and empty the cooling system. When the engine is drained, unfasten the radiator hose from the top of the radiator and the shroud as well. Next, remove the radiator cooling fan and shroud and after that remove the crankshaft damper bolt. The damper can be removed using Crankshaft Insert 8513A and Three Jaw Puller 1023. Use Seal Remover 9071 to take out the crankshaft front seal.