How to Install a Front Exterior Door Handle on 2009 Dodge Viper?

Place the outside handle within the door and secure the electrical connector (4). Put the shipping screw (1) in and let the handle lever go, next secure the bolts (2), tighten them to 5 Nm (45 in. lbs.). Then, install the door trim panel, click the handle cover (1) into its hole and at last, attach the rubber (1) grommet.

OEM 2009 Dodge Viper Door Handle

Inside Door Handle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Door Handles found

View related parts
2009 Dodge Viper Handle, Outside, Front Outer Passenger Side Part Number: 5029144AB
Product Specifications
- Other Name: Handle - Front Door Exterior; Exterior Door Handle, Front Right Outer; Handle Front Door Exterior; Exterior Door Handle
- Position: Front Outer Passenger Side
- Item Weight: 0.80 Pounds
- Item Dimensions: 6.6 x 3.3 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5029144AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Viper Submodels:
- SRT-10, SRT-10 ACR | 10 Cyl 8.3 L GAS, 10 Cyl 8.4 L GAS
View related parts
2009 Dodge Viper Handle, Outside, Front Outer Driver Side Part Number: 5029145AC
Product Specifications
- Other Name: Handle - Front Door Exterior; Exterior Door Handle, Front Left Outer; Handle Front Door Exterior; Exterior Door Handle
- Position: Front Outer Driver Side
- Item Weight: 0.60 Pounds
- Item Dimensions: 6.7 x 3.3 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5029145AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Viper Submodels:
- SRT-10, SRT-10 ACR | 10 Cyl 8.3 L GAS, 10 Cyl 8.4 L GAS
View related parts
2009 Dodge Viper Handle Switch Part Number: 4865870AB
Product Specifications
- Other Name: Switch - Door Handle; Door Lock Switch; Switch; Switch Door Handle
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.7 x 2.5 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4865870AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Viper Submodels:
- SRT-10, SRT-10 ACR | 10 Cyl 8.3 L GAS, 10 Cyl 8.4 L GAS

2009 Dodge Viper Door Handle Parts and Q&A

Q: How to Install a Front Exterior Door Handle on 2009 Dodge Viper?
A: Place the outside handle within the door and secure the electrical connector (4). Put the shipping screw (1) in and let the handle lever go, next secure the bolts (2), tighten them to 5 Nm (45 in. lbs.). Then, install the door trim panel, click the handle cover (1) into its hole and at last, attach the rubber (1) grommet.