How to Install a Door Handle on the Front Exterior on Dodge Viper?

Mount the outside door handle assembly (3) to the door and then join the electrical connector with it (4). Screw the drive pipe into the bottom plate (1), release the handle and then put the bolts through the bottom plate and tighten them gently to 5 Nm (45 in. lbs.). After that, attach the door trim panel, snap handle cover (1) into the right spot and complete with placing rubber access hole (1) grommet.

How to Remove a Door Handle from the Front Exterior on Dodge Viper?

The first step is to open the door, remove the rubber grommet at the outer handle access and access the handle. Following this, slide in a small flat bladed tool to the inner part of the access hole and lift the handle cover off. After that, unfasten the two bolts. Firmly hold down the lever, then back out the shipping screw to hold the lever down inside the handle assembly. After the previous step, remove the trim and disconnect the connector for the electrics. After completing the rest, take the handle assembly off the door.

OEM Dodge Viper Door Handle

Inside Door Handle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Door Handles found

View related parts
Dodge Viper Handle, Outside, Front Outer Passenger Side Part Number: 68096396AB
$275.15 MSRP: $417.00
You Save: $141.85 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle - Front Door Exterior; Exterior Door Handle, Front Right Outer; Exterior Door Handle
- Position: Front Outer Passenger Side
- Replaces: 68096396AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2013-2017 Dodge Viper | ACR, Base, GT, GTC, GTS | 10 Cyl 8.4 L GAS, 8.4L V10
View related parts
Dodge Viper Handle Switch Part Number: 5029677AA
Product Specifications
- Other Name: Switch - Outside Door Handle; Switch Outside Door Handle
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015 Dodge Viper | Base, GT, GTS | 10 Cyl 8.4 L GAS
View related parts
Dodge Viper Handle, Outside, Front Outer Passenger Side Part Number: 5029144AB
Product Specifications
- Other Name: Handle - Front Door Exterior; Exterior Door Handle, Front Right Outer; Handle Front Door Exterior; Exterior Door Handle
- Position: Front Outer Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010, 2003-2006 Dodge Viper | SRT-10, SRT-10 ACR | 10 Cyl 8.3 L GAS, 10 Cyl 8.4 L GAS
View related parts
Dodge Viper Handle, Outside, Front Outer Driver Side Part Number: 5029145AC
Product Specifications
- Other Name: Handle - Front Door Exterior; Exterior Door Handle, Front Left Outer; Handle Front Door Exterior; Exterior Door Handle
- Position: Front Outer Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010, 2005-2006 Dodge Viper | SRT-10, SRT-10 ACR | 10 Cyl 8.3 L GAS, 10 Cyl 8.4 L GAS
View related parts
Dodge Viper Handle Switch Part Number: 4865870AB
Product Specifications
- Other Name: Switch - Door Handle; Door Lock Switch; Switch; Switch Door Handle
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010, 2003-2006 Dodge Viper | SRT-10, SRT-10 ACR | 10 Cyl 8.3 L GAS, 10 Cyl 8.4 L GAS
View related parts
Dodge Viper Handle, Outside, Front Part Number: PS21TX9
Product Specifications
- Other Name: Handle - Front Door; Exterior Door Handle; Handle Front Door
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2002 Dodge Viper | R/T-10 | 10 Cyl 8.0 L GAS
View related parts
Dodge Viper Handle, Outside, Front Part Number: PS20TX9
Product Specifications
- Other Name: Handle - Front Door; Exterior Door Handle; Handle Front Door
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2002 Dodge Viper | R/T-10 | 10 Cyl 8.0 L GAS
View related parts
Dodge Viper Handle, Outside, Front Part Number: PS21SX8
Product Specifications
- Other Name: Handle - Front Door; Exterior Door Handle; Cover, Outer Stanchion; Handle Front Door
- Position: Front
- Replaces: PS21DX8AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-2002 Dodge Viper | ACR, GT2, GTS, R/T-10 | 10 Cyl 8.0 L GAS
View related parts
Dodge Viper Handle, Outside, Front Part Number: PS20SX8
Product Specifications
- Other Name: Handle - Front Door; Exterior Door Handle; Cover, Outer Stanchion; Handle Front Door
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-2002 Dodge Viper | ACR, GT2, GTS, R/T-10 | 10 Cyl 8.0 L GAS
View related parts
Dodge Viper Handle, Outside, Front Outer Driver Side Part Number: 5029145AB
Product Specifications
- Other Name: Handle - Front Door Exterior; Exterior Door Handle, Front Left Outer; Handle Front Door Exterior; Exterior Door Handle
- Position: Front Outer Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2004 Dodge Viper | SRT-10 | 10 Cyl 8.3 L GAS
View related parts
Dodge Viper Handle, Outside, Front Outer Driver Side Part Number: 68096397AB
Product Specifications
- Other Name: Handle - Front Door Exterior; Exterior Door Handle, Front Left Outer; Exterior Door Handle
- Position: Front Outer Driver Side
- Replaces: 68096397AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2013-2017 Dodge Viper | ACR, Base, GT, GTC, GTS | 10 Cyl 8.4 L GAS, 8.4L V10

Dodge Viper Door Handle

Choose OEM Door Handle that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Door Handle follows strict manufacturing steps to lock in quality and fit. If your Dodge Viper matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Viper parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

There is no better part that represents the usefulness and efficiency of a Dodge Viper car than this Dodge Viper Door Handle. One of the most significant parts of the Exterior & Accent Trim, the Door Handle is also a component that answers to the general function, which is to allow people to enter or exit the car easily. Designed for different models of the Dodge Viper car such as the RT/10, GTS, and others the Dodge Viper Door Handle increases not only the car's efficiency but also safety, it can be easily operated even in difficult conditions. Made with relatively heavy material, it is designed to be long-lasting and withstand the general use, hence reducing chances of wear and tear that can cause problems to the door latch assembly. Such reliability is especially appreciated in the case of the driver's side handle that, as a rule, is subjected to the heaviest workload. Also, the shape and design of, for instance, the Dodge Viper Door Handle are consistent with the car's design but also take ergonomic strategies into account. The design of the Dodge Viper Door Handle demonstrates this focus and quality of the automobiles in the market thus making it a major attraction. The Dodge Viper Door Handle is not just a functional item, but it is a symbol of the tradition of the Dodge Viper and a promise of more great trips ahead.

Dodge Viper Door Handle Parts and Q&A

Handle, Outside, Front Outer Driver Side
5029145AC
Q: How to Install a Door Handle on the Front Exterior on Dodge Viper?
A:
Mount the outside door handle assembly (3) to the door and then join the electrical connector with it (4). Screw the drive pipe into the bottom plate (1), release the handle and then put the bolts through the bottom plate and tighten them gently to 5 Nm (45 in. lbs.). After that, attach the door trim panel, snap handle cover (1) into the right spot and complete with placing rubber access hole (1) grommet.
Handle, Outside, Front Outer Passenger Side
5029144AB
Q: How to Remove a Door Handle from the Front Exterior on Dodge Viper?
A:
The first step is to open the door, remove the rubber grommet at the outer handle access and access the handle. Following this, slide in a small flat bladed tool to the inner part of the access hole and lift the handle cover off. After that, unfasten the two bolts. Firmly hold down the lever, then back out the shipping screw to hold the lever down inside the handle assembly. After the previous step, remove the trim and disconnect the connector for the electrics. After completing the rest, take the handle assembly off the door.