How to Detach a Front Door Handle on 2008 Dodge Viper?

Before removing the handle, open the door and pop out the rubber grommet at the hole on the outside handle. After that, insert a flat small tool inside the access point to take out and release the handle cover. After that, loosen and remove the bolts holding the fan. Pull on the lever on the handle assembly and tighten the shipping screw to keep the lever down after depressing it. Once that is done, take out the door trim panel. Separate the electrical connector and, after that, remove the handle assembly from the door.

OEM 2008 Dodge Viper Door Handle

Inside Door Handle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Door Handles found

View related parts
2008 Dodge Viper Handle, Outside, Front Outer Passenger Side Part Number: 5029144AB
Product Specifications
- Other Name: Handle - Front Door Exterior; Exterior Door Handle, Front Right Outer; Handle Front Door Exterior; Exterior Door Handle
- Position: Front Outer Passenger Side
- Item Weight: 0.80 Pounds
- Item Dimensions: 6.6 x 3.3 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5029144AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Viper Submodels:
- SRT-10, SRT-10 ACR | 10 Cyl 8.3 L GAS, 10 Cyl 8.4 L GAS
View related parts
2008 Dodge Viper Handle, Outside, Front Outer Driver Side Part Number: 5029145AC
Product Specifications
- Other Name: Handle - Front Door Exterior; Exterior Door Handle, Front Left Outer; Handle Front Door Exterior; Exterior Door Handle
- Position: Front Outer Driver Side
- Item Weight: 0.60 Pounds
- Item Dimensions: 6.7 x 3.3 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5029145AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Viper Submodels:
- SRT-10, SRT-10 ACR | 10 Cyl 8.3 L GAS, 10 Cyl 8.4 L GAS
View related parts
2008 Dodge Viper Handle Switch Part Number: 4865870AB
Product Specifications
- Other Name: Switch - Door Handle; Door Lock Switch; Switch; Switch Door Handle
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.7 x 2.5 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4865870AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Viper Submodels:
- SRT-10, SRT-10 ACR | 10 Cyl 8.3 L GAS, 10 Cyl 8.4 L GAS

2008 Dodge Viper Door Handle Parts and Q&A

Q: How to Detach a Front Door Handle on 2008 Dodge Viper?
A: Before removing the handle, open the door and pop out the rubber grommet at the hole on the outside handle. After that, insert a flat small tool inside the access point to take out and release the handle cover. After that, loosen and remove the bolts holding the fan. Pull on the lever on the handle assembly and tighten the shipping screw to keep the lever down after depressing it. Once that is done, take out the door trim panel. Separate the electrical connector and, after that, remove the handle assembly from the door.