How to Remove the Canister Purge Valve Duty Cycle EVAP Solenoid on 2009 Jeep Commander?

You will find the duty cycle EVAP canister purge valve (1) attached to a bracket under the hood. Begin by unplugging the wiring plug at the valve (2), then remove the vacuum connection. Remove the valve by picking it up straight from its bracket.

OEM 2009 Jeep Commander Canister Purge Valve

Vapor Canister Purge Valve EVAP

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Canister Purge Valve found

View related parts
2009 Jeep Commander Purge Valve Part Number: 52090419AA
Product Specifications
- Other Name: Solenoid - Proportional Purge; Vapor Canister Purge and Vent Valve.; Purge Solenoid; Vacuum Solenoid; Solenoid; Solenoid Proportional Purge
- Item Weight: 1.00 Pounds
- Item Dimensions: 2.6 x 3.5 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52090419AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2009 Jeep Commander Canister Purge Valve Parts and Q&A

Q: How to Remove the Canister Purge Valve Duty Cycle EVAP Solenoid on 2009 Jeep Commander?
A: You will find the duty cycle EVAP canister purge valve (1) attached to a bracket under the hood. Begin by unplugging the wiring plug at the valve (2), then remove the vacuum connection. Remove the valve by picking it up straight from its bracket.