How to Install an Oil Filter for Your Engine on 2009 Jeep Commander?

To install the engine oil filter, lubricate the gasket with clean oil, then thread the filter onto the adapter and hand tighten it one full turn. After installation, add oil, check the crankcase level, start the engine, and inspect for leaks.

OEM 2009 Jeep Commander Oil Filter

Engine Oil filter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Oil Filters found

View related parts
2009 Jeep Commander Oil Filter Part Number: 4884899AC
$6.87 MSRP: $10.05
You Save: $3.18 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Filter - Engine Oil; Engine Oil Filter; Filter Change Maintenance Kit; Spin-On Oil Filter; Filter Engine Oil [22Mm]; Filter Engine Oil
- Replaces: 4884899AB
- Item Weight: 1.30 Pounds
- Item Dimensions: 4.1 x 4.2 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4884899AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Jeep Commander Submodels:
- Limited, Overland, Sport | 4.7L V8, 5.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2009 Jeep Commander Oil Filter Part Number: 5184231AB
$7.66 MSRP: $11.25
You Save: $3.59 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Filter - Engine Oil; Engine Oil Filter; Filter Change Maintenance Kit
- Replaces: 5184231AA
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5184231AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2009 Jeep Commander Submodels:
- Sport | 3.7L V6, 6 Cyl 3.7 L GAS

2009 Jeep Commander Oil Filter Parts and Q&A

Q: How to Install an Oil Filter for Your Engine on 2009 Jeep Commander?
A: To install the engine oil filter, lubricate the gasket with clean oil, then thread the filter onto the adapter and hand tighten it one full turn. After installation, add oil, check the crankcase level, start the engine, and inspect for leaks.