How to Install a MAP Sensor on 2009 Jeep Patriot?

The manifold absolute pressure (MAP) sensor must be installed by using the screw to screw it on the intake manifold first and then tighten the screw to 4.5 Nm (40 in. lbs.). Next, attach electrical connector and sensor and reconnect negative battery cable.

OEM 2009 Jeep Patriot MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 MAP Sensor found

View related parts
2009 Jeep Patriot M.A.P. Sensor Part Number: 5033310AB
$69.00 MSRP: $102.00
You Save: $33.00 (33%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; MAP Sensor; Sensor Map; Pressure Sensor
- Replaces: 5149092AA
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.9 x 2.6 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5033310AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Jeep Patriot Submodels:
- 75th Anniversary, Latitude, Latitude X, Limited, Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2009 Jeep Patriot MAP Sensor Parts and Q&A

Q: How to Install a MAP Sensor on 2009 Jeep Patriot?
A: The manifold absolute pressure (MAP) sensor must be installed by using the screw to screw it on the intake manifold first and then tighten the screw to 4.5 Nm (40 in. lbs.). Next, attach electrical connector and sensor and reconnect negative battery cable.