How to Remove the Knock Sensor from the Cylinder Block on 2009 Jeep Patriot?

Begin by removing the negative battery cable before you take out the knock sensor set into the side of the block ahead of the starter under the manifold. Then, remove the bolt that holds the knock sensor and take away the sensor together with the electrical cable. Then, remove the electrical connector from the knock sensor and finally take out the knock sensor.

OEM 2009 Jeep Patriot Knock Sensor

Engine Knock Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Knock Sensor found

View related parts
2009 Jeep Patriot Knock Sensor Part Number: 5033316AB
$128.23 MSRP: $194.00
You Save: $65.77 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Knock; Ignition Knock (Detonation) Sensor; MAP Sensor; Sensor Knock
- Replaces: 5033316AA, 56028563AA
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.1 x 1.3 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5033316AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Jeep Patriot Submodels:
- 75th Anniversary, Latitude, Latitude X, Limited, Sport | 2.0L L4, 2.4L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2009 Jeep Patriot Knock Sensor Parts and Q&A

Q: How to Remove the Knock Sensor from the Cylinder Block on 2009 Jeep Patriot?
A: Begin by removing the negative battery cable before you take out the knock sensor set into the side of the block ahead of the starter under the manifold. Then, remove the bolt that holds the knock sensor and take away the sensor together with the electrical cable. Then, remove the electrical connector from the knock sensor and finally take out the knock sensor.