How to Install a Ball Joint in the Front Suspension on 2009 Jeep Wrangler?

With special tool 6752 (DRIVER), 6289-6 (RECEIVER) and C-42121-F (PRESS), put the upper ball stud on the front suspension as you see in the video. For 4X4 cars, fit the axle shaft into the rear axle. Then, set up the steering knuckle following the directions given in the appropriate service manual.

OEM 2009 Jeep Wrangler Ball Joint

Control Arm Joint

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Ball Joint found

View related parts
2009 Jeep Wrangler Ball Joint Part Number: 68004085AA
$282.12 MSRP: $418.00
You Save: $135.88 (33%)
Product Specifications
- Other Name: Ball Join - Knuckle; Suspension Ball Joint Kit; Suspension Ball Joint; Telescopic Ball Joint; Ball Joints; Ball Joint Kit Knuckle
- Item Weight: 2.30 Pounds
- Item Dimensions: 2.4 x 5.2 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68004085AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Jeep Wrangler Submodels:
- 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S, Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S, Unlimited X, X, X-S | 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS

2009 Jeep Wrangler Ball Joint Parts and Q&A

Q: How to Install a Ball Joint in the Front Suspension on 2009 Jeep Wrangler?
A: With special tool 6752 (DRIVER), 6289-6 (RECEIVER) and C-42121-F (PRESS), put the upper ball stud on the front suspension as you see in the video. For 4X4 cars, fit the axle shaft into the rear axle. Then, set up the steering knuckle following the directions given in the appropriate service manual.