How to Install a Release Bearing on 2009 Jeep Wrangler?

Use Mopar(TM) high temperature bearing grease or another similar product to lubricate the crankshaft pilot bearing, then use a screwdriver with a broad, short blade to push the grease into the end of the clutch release bearing through the hub. After that, cover the input shaft splines, bearing retainer slide surface, fork pivot and release fork pivot surface with lubricant. After that, fix the bearing to the release fork and then proceed to install the transmission.

OEM 2009 Jeep Wrangler Release Bearing

Clutch Release Throw Out Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Release Bearing found

View related parts
2009 Jeep Wrangler Release Bearing Part Number: 53008342
$153.85 MSRP: $231.00
You Save: $77.15 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing - Clutch Release; Clutch Release Bearings; Clutch Release Bearing; Clutch Kit; Bearing Assembly, With Sleeve, Clutch Release 1990-91; For 3.9 L, 5.2 L, 5.9 L Engines.
- Replaces: 53008342AB
- Item Weight: 1.50 Pounds
- Item Dimensions: 3.2 x 4.9 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53008342
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Jeep Wrangler Submodels:
- 65th Anniversary Edition, 70th Anniversary, 75th Anniversary, Renegade, Rio Grande, Rubicon, S, SE, Sahara, Sport, Sport S, Unlimited, Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S, Unlimited X, X, X-S | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS

2009 Jeep Wrangler Release Bearing Parts and Q&A

Q: How to Install a Release Bearing on 2009 Jeep Wrangler?
A: Use Mopar(TM) high temperature bearing grease or another similar product to lubricate the crankshaft pilot bearing, then use a screwdriver with a broad, short blade to push the grease into the end of the clutch release bearing through the hub. After that, cover the input shaft splines, bearing retainer slide surface, fork pivot and release fork pivot surface with lubricant. After that, fix the bearing to the release fork and then proceed to install the transmission.