OEM 2010 Chrysler PT Cruiser Coolant Reservoir

2010 Chrysler PT Cruiser Coolant Reservoir Parts and Q&A

• Q: How to Install a Coolant Reservoir for 2.0/2.4L Engines on 2010 Chrysler PT Cruiser?

  A: With the 2.0/2.4L non-turbo engine, put in the coolant reservoir and tighten the fasteners to 4 Nm (35 in. lbs.), checking the vent hose routing by clipping it to the stud on the dash panel, then join the MAP sensor connector, position and attach the power steering fluid reservoir bracket fastener and link the overflow hose to the coolant outlet connector before filling the reservoir. Add the coolant reservoir, tighten the fasteners to 4 Nm (35 in. lbs.), join the throttle and speed control cables to the throttle body, connect the throttle cable shield to the throttle body, hook up the overflow hose to the coolant outlet and fill the reservoir to the correct level.