How to Maintain the Cigarette Lighter and What Steps Are Involved for 2010 Chrysler Town & Country?

To service the auxiliary cigarette lighter, start by disconnecting the negative battery cable. Then, use tool 9857 Cigarette Lighter Remover, inserting it with tips against the bosses. Gently rock the pliers to extract the base from the mounting ring, and disconnect the base wires.

OEM 2010 Chrysler Town & Country Cigarette Lighter

Car Cigarette Lighter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Cigarette Lighter found

View related parts
2010 Chrysler Town & Country Power Outlet, Center Part Number: 4793554AC
$24.35 MSRP: $36.05
You Save: $11.70 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lighter; 12 Volt Accessory Power Outlets: Rear Right, Rear Left, Center, Front, Rear; Housing; Cigarette Lighter Socket.; Power Outlet Mount; Armrest Outlet; Power Outlet Cigar; Power Outlet Power
- Position: Center
- Replaces: 4793554AB
- Item Weight: 0.40 Pounds
- Item Dimensions: 6.2 x 4.2 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4793554AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Chrysler Town & Country Submodels:
- 30th Anniversary Edition, Base, EL, EX, LX, LXi, Limited, Limited Platinum, S, Touring, Touring L, Touring Plus, Walter P. Chrysler Signature Series | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS

2010 Chrysler Town & Country Cigarette Lighter Parts and Q&A

Q: How to Maintain the Cigarette Lighter and What Steps Are Involved for 2010 Chrysler Town & Country?
A: To service the auxiliary cigarette lighter, start by disconnecting the negative battery cable. Then, use tool 9857 Cigarette Lighter Remover, inserting it with tips against the bosses. Gently rock the pliers to extract the base from the mounting ring, and disconnect the base wires.