Other Name: Seal - Crankshaft Oil; Engine Crankshaft Seal, Front; Timing Cover Gasket; Timing Cover Seal; Crankshaft Seal; Front Crank Seal; Timing Cover Assy; Front Main Crankshaft Seal.
Position: Front
Replaces: 4792317, 4273275
Item Weight: 0.50 Pounds
Item Dimensions: 0.6 x 1.9 x 1.9 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 4792317AB
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2010 Chrysler Town & Country Submodels:
Base, EL, EX, LX, LXi, Limited, SX, Touring, Touring Plus, Walter P. Chrysler Signature Series | 4 Cyl 2.5 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
Other Name: Retainer - Crankshaft Rear Oil; Retainer And Seal Crankshaft Rear Oil
Position: Rear
Item Weight: 1.00 Pounds
Item Dimensions: 1.3 x 10.3 x 10.9 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 68031388AA
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2010 Chrysler Town & Country Submodels:
LX, Touring, Touring Plus, Walter P. Chrysler Signature Series | 6 Cyl 3.3 L FLEX, 6 Cyl 3.8 L GAS
2010 Chrysler Town & Country Crankshaft Seal Parts and Q&A
Q: How to Remove the Front Crankshaft Seal on 2010 Chrysler Town & Country?
A: You should disconnect the battery's negative cable as the very first thing when removing the front crankshaft seal. Subsequent to this, take out the accessory drive belt and afterward the crankshaft damper. Carefully place Special Tool 6341A on the nose of the crankshaft and use it to firmly screw the seal into place, so as not to harm the crankshaft seal surface of the cover. Once done, continue turning the forcing screw until the seal breaks free from the cover.