How is the Oil Pressure Switch Installed on 2010 Chrysler Town & Country?

After torquing the oil pressure switch (5) to 23 Nm (200 in. lbs.), connect the electrical connector to it. Lower the vehicle, start the engine and then look for leaks around it, then handle the oil level if required.

OEM 2010 Chrysler Town & Country Oil Pressure Switch

Oil Pressure Sender Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Oil Pressure Switch found

View related parts
2010 Chrysler Town & Country Switch - Oil Pressure Part Number: 5149098AB
$40.91 MSRP: $55.60
You Save: $14.69 (27%)
ADD TO CART
Product Specifications
- Other Name: SWITCH-OIL PRESSURE
- SKU: 5149098AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2010 Chrysler Town & Country Submodels:
- Base, EL, EX, LX, LXi, Limited, SX, Touring, Touring Plus, Walter P. Chrysler Signature Series | 3.3L V6, 3.8L V6, 4.0L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS

2010 Chrysler Town & Country Oil Pressure Switch Parts and Q&A

Q: How is the Oil Pressure Switch Installed on 2010 Chrysler Town & Country?
A: After torquing the oil pressure switch (5) to 23 Nm (200 in. lbs.), connect the electrical connector to it. Lower the vehicle, start the engine and then look for leaks around it, then handle the oil level if required.