How to Install the A/C Switch and Initiate Actuator Calibration on 2010 Dodge Avenger?

The A/C-heater control is placed on the console bezel-back and secured with the four screws worldwide tightened to 2 Nm (17 in. lbs.). Following that, set the console bezel into place and attach the negative battery cable again. As soon as the ignition is switched on with a new or original A/C-heater control, the Actuator Calibration will run automatically. If you using the A/C-heater control in another car previously, you should start the Actuator Calibration function using a scan tool. Should it be needed, operate the Actuator Calibration function using your scan tool.

OEM 2010 Dodge Avenger A/C Switch

Air Conditioning Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 A/C Switches found

View related parts
2010 Dodge Avenger Heater Control Part Number: 55111888AI
Product Specifications
- Other Name: Control - A/C and Heater; HVAC Temperature Control Panel; Climate Control Module; Blower Switch; Dash Control Unit; Control A/C And Heater
- Replaces: 55111888AF, 55111888AD, 55111888AE, 55111888AH, 55111888AA, 55111888AB, 55111888AC, 55111888AG
- Item Weight: 1.20 Pounds
- Item Dimensions: 9.3 x 5.4 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55111888AI
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Avenger Submodels:
- Express, Heat, Lux, Mainstreet, R/T, SE, SXT, SXT Plus | 2.4L L4, 2.7L V6, 3.5L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX
View related parts
2010 Dodge Avenger Heater Control Part Number: 55111937AB
Product Specifications
- Other Name: Control - A/C And Heater; HVAC Temperature Control Panel; Climate Control Module; Blower Control Switch; Dash Control Unit
- Replaces: 55111889AB, 55111889AA, 5058100AF, 5058100AE, 5058100AD, 55111937AA, 5058100AC
- Item Weight: 1.10 Pounds
- Item Dimensions: 4.0 x 5.8 x 13.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55111937AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Avenger Submodels:
- Express, R/T, SE, SXT | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS

2010 Dodge Avenger A/C Switch Parts and Q&A

Q: How to Install the A/C Switch and Initiate Actuator Calibration on 2010 Dodge Avenger?
A: The A/C-heater control is placed on the console bezel-back and secured with the four screws worldwide tightened to 2 Nm (17 in. lbs.). Following that, set the console bezel into place and attach the negative battery cable again. As soon as the ignition is switched on with a new or original A/C-heater control, the Actuator Calibration will run automatically. If you using the A/C-heater control in another car previously, you should start the Actuator Calibration function using a scan tool. Should it be needed, operate the Actuator Calibration function using your scan tool.