How to Service a Yaw Sensor on 2010 Dodge Avenger?

To service the yaw rate sensor, disconnect the negative battery cable first. Next, withdraw the center console and disconnect the wiring harness coming from the dynamics sensor. Then, remove the nuts that hold the dynamics sensor to the floor pan tunnel and finally, remove the sensor.

OEM 2010 Dodge Avenger Yaw Sensor

Yaw Rate Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Yaw Sensor found

View related parts
2010 Dodge Avenger Yaw Rate Sensor Part Number: 56029483AA
Product Specifications
- Other Name: Module - Dynamics; Electronic Stability System Control Module; ABS Control Module; Control Module; Lateral Accelerometer Sensor; Electronic Stability Module.
- Item Weight: 0.60 Pounds
- Item Dimensions: 3.8 x 4.0 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56029483AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Avenger Submodels:
- Express, Heat, Lux, Mainstreet, R/T, SE, SXT, SXT Plus | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX

2010 Dodge Avenger Yaw Sensor Parts and Q&A

Q: How to Service a Yaw Sensor on 2010 Dodge Avenger?
A: To service the yaw rate sensor, disconnect the negative battery cable first. Next, withdraw the center console and disconnect the wiring harness coming from the dynamics sensor. Then, remove the nuts that hold the dynamics sensor to the floor pan tunnel and finally, remove the sensor.