Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2010 Dodge Avenger Parking Brake Cable

Emergency Parking Brake Release Cable
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Parking Brake Cables found

  • 2010 Dodge Avenger Parking Brake Cable - 5085747AH
    2010 Dodge Avenger Parking Brake Cable Diagram - 5085747AH
    View related parts

    2010 Dodge Avenger Cable Part Number: 5085747AH

    $48.85 MSRP: $71.70
    You Save: $22.85 (32%)
    ADD TO CART
    Product Specifications
    • Other Name: Cable - Parking Brake; Brake Cable; Cable Parking Brake
    • Replaces: 5085747AG, 5085747AD, 5085747AE, 5085747AF
    • Item Weight: 1.70 Pounds
    • Item Dimensions: 68.7 x 1.1 x 0.6 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 5085747AH
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2010 Dodge Avenger Submodels:
    • Express, Heat, Lux, Mainstreet, R/T, SE, SXT, SXT Plus | 2.4L L4, 2.7L V6, 3.5L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX
  • 2010 Dodge Avenger Parking Brake Cable - 5085746AG
    2010 Dodge Avenger Parking Brake Cable Diagram - 5085746AG
    View related parts

    2010 Dodge Avenger Cable Part Number: 5085746AG

    Product Specifications
    • Other Name: Cable - Parking Brake; Brake Cable; Cable Parking Brake
    • Replaces: 5085746AD, 5085746AE, 5085746AF
    • Item Weight: 1.70 Pounds
    • Item Dimensions: 72.1 x 1.1 x 0.6 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 5085746AG
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2010 Dodge Avenger Submodels:
    • Express, Heat, Lux, Mainstreet, R/T, SE, SXT, SXT Plus | 2.4L L4, 2.7L V6, 3.5L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX

2010 Dodge Avenger Parking Brake Cable Parts and Q&A

  • Q: How to Maintain and Fix a Parking Brake Cable on 2010 Dodge Avenger?
    A: Begin by unhooking and removing the negative battery cable to deal with or mend the parking brake cable. Block the tire and wheel set after releasing the parking brake lever so the vehicle won't move. Take out the center console and pull down the parking brake lever. Badge with parking brake Off or if required may need to consult manual for model matching procedure. Lift up the rear seat cushion, then pull the carpeting at the back and fold it forward so you can see the parking brake cables under the rear floor. With a 1/2 inch (13 mm) wrench, collapse one parking brake cable's retainer and pull the entire housing straight away from its bracket. Lift the car, loose the mounting nuts for the rear wheels and then unmount the tire and wheel. After removing the parking brake shoes, pull out the hair pin pinning the parking brake cable to the brake support plate. Pull the parking brake cable out from both the support plate and trailing link hole, then remove the screw and nut jointing the clamp to the body. After that, use the sealing grommet to remove the parking brake cable as it passes through the hole in the floor pan.

Related 2010 Dodge Avenger Parts

Alternate Year Models

+
2009 Dodge Avenger Parking Brake Cable 2011 Dodge Avenger Parking Brake Cable