Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2010 Dodge Avenger Brake Master Cylinder

  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Brake Master Cylinders found

  • 2010 Dodge Avenger Brake Master Cylinder - 68004718AE
    2010 Dodge Avenger Brake Master Cylinder Diagram - 68004718AE
    View related parts

    2010 Dodge Avenger Master Cylinder Part Number: 68004718AE

    $156.10 MSRP: $234.00
    You Save: $77.90 (34%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Cylinder - Brake; Brake Master Cylinder; Master Cylinder Brake
    • Replaces: 68004718AA, 68004718AB, 68004718AC, 68004718AD
    • Item Weight: 2.50 Pounds
    • Item Dimensions: 6.2 x 7.9 x 13.6 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 68004718AE
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2010 Dodge Avenger Submodels:
    • Express, Heat, Lux, Mainstreet, R/T, SE, SXT, SXT Plus | 2.4L L4, 2.7L V6, 3.5L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX
  • 2010 Dodge Avenger Brake Master Cylinder - 68004720AD
    2010 Dodge Avenger Brake Master Cylinder Diagram - 68004720AD
    View related parts

    2010 Dodge Avenger Master Cylinder Part Number: 68004720AD

    Product Specifications
    • Other Name: Master Cylinder - Brake; Brake Master Cylinder
    • Replaces: 68004720AC, 68004720AB, 68004720AA
    • Item Weight: 7.10 Pounds
    • Item Dimensions: 12.1 x 9.9 x 6.7 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 68004720AD
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2010 Dodge Avenger Submodels:
    • Express, R/T, SE, SXT | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS

2010 Dodge Avenger Brake Master Cylinder Parts and Q&A

  • Q: How to Remove the Brake Master Cylinder on 2010 Dodge Avenger?
    A: Before taking the brake master cylinder out of a left-hand drive vehicle, make sure the power brake booster's vacuum is gone by either stomping on the brake pedal a few times or by removing and replacing the check valve without damaging the grommet. Remove the negative battery cable and set it apart and then unplug the wiring harness connector connected to the brake fluid level switch inside the master brake fluid reservoir. After that, take the primary and secondary brake lines off the master cylinder and cover any now uncovered brake tube ends with plugs. If you have a manual transaxle, loosen and slide the hose of the clutch performer off the reservoir port. After you check the adjustment of the pushrod, be sure to clean the master cylinder attachment to the power brake booster carefully. Then, unscrew the two nuts on the master cylinder and slide it straight out of the power brake booster.

Related 2010 Dodge Avenger Parts

Alternate Year Models

+
2009 Dodge Avenger Brake Master Cylinder 2011 Dodge Avenger Brake Master Cylinder