How to Install a Belt Tensioner for the Accessory Drive on 2010 Dodge Caliber?

To fit the accessory drive belt tensioner, place it and then put in the mounting bolt (1), securing it to a torque of 24 Nm (212 in. lbs.). Then, place the accessory drive belt and after that, install the belt splash shield (3) before you lower the vehicle.

OEM 2010 Dodge Caliber Belt Tensioner

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Belt Tensioner found

View related parts
2010 Dodge Caliber Belt Tensioner Part Number: 4891595AE
$92.14 MSRP: $141.00
You Save: $48.86 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tensioner - Belt, Accessory Drive Tensioner, Serpentine Kit, Automatic Tensioner, Idler Pulley; Tension Pulley; Serpentine Tensioner; Tensioner; Tensioner Belt; Drive Belt Tensioner
- Replaces: 4891595AD, 4891595AC, 4891595AB
- Item Weight: 2.10 Pounds
- Item Dimensions: 4.9 x 5.0 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4891595AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Caliber Submodels:
- Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 1.8L L4, 2.0L L4, 2.4L L4, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2010 Dodge Caliber Belt Tensioner Parts and Q&A

Q: How to Install a Belt Tensioner for the Accessory Drive on 2010 Dodge Caliber?
A: To fit the accessory drive belt tensioner, place it and then put in the mounting bolt (1), securing it to a torque of 24 Nm (212 in. lbs.). Then, place the accessory drive belt and after that, install the belt splash shield (3) before you lower the vehicle.