OEM 2010 Dodge Caliber Fuel Rail

2010 Dodge Caliber Fuel Rail Parts and Q&A

• Q: How to install a Fuel Rail on 2010 Dodge Caliber?

  A: Apply a thin coating of clean engine oil to the O-ring on each injector's nozzle, then place the injectors into the fuel rail, securing each in place with the clip. After that, put each fuel injector nozzle into its specific opening in the intake manifold and make sure it is properly seated. Screw in the 2 bolts to secure the fuel rail and tighten them so they fasten at 8.8 ft. lbs. Connect the fuel rail to the wiring harness and then hook up and secure the electrical pieces of the fuel injectors. Link the fuel line to the rail after that and then join the negative battery cable. You should finish with the Scan Tool Fuel System Test by pressing air into the fuel system and monitoring for escaping fuel.