How to Install an Intake Manifold on 2010 Dodge Caliber?

Before you install the intake manifold, all its gasket surfaces must be cleaned and replaced with the new gasket. Then, fit the intake manifold and screw the bolts until they reach 25 Nm (220 in. lbs.). Connect the fuel rail assembly to the intake manifold after that and tighten the bolts to 23 Nm (200 in. lbs.). Make sure to put on the fuel injector connectors as well. Check for any harm to the quick connect fittings and change them whenever required. Connect the fuel supply hose to the fuel rail assembly and check that it stays in place when you gently pull at the connector. Once more, join the negative battery terminal, place the coolant, put the air filter cabinet in and finish by installing the engine cover.

OEM 2010 Dodge Caliber Intake Manifold

Engine Intake Manifold

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Intake Manifolds found

View related parts
2010 Dodge Caliber Intake Manifold Part Number: 4884495AK
$499.22 MSRP: $734.00
You Save: $234.78 (32%)
ADD TO CART
Product Specifications
- Other Name: Manifold - Intake; Engine Intake Manifold; Manifold Intake
- Replaces: 4884495AG, 4884495AF, 4884495AI, 4884495AE, 4884542AC, 4884495AH, 4884495AJ, 4884495AD
- Item Weight: 12.90 Pounds
- Item Dimensions: 9.2 x 18.4 x 21.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4884495AK
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Caliber Submodels:
- R/T, Rush, SE, SXT, Uptown | 2.0L L4, 2.4L L4, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2010 Dodge Caliber Intake Manifold Part Number: 4884882AG
Product Specifications
- Other Name: Manifold - Intake; Engine Intake Manifold; Manifold Intake Includes All Items In The Box; Manifold Intake
- Replaces: 4884882AF
- Item Weight: 13.60 Pounds
- Item Dimensions: 22.9 x 19.6 x 9.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4884882AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Caliber Submodels:
- Express, Heat, Mainstreet, SE, SXT, Uptown | 4 Cyl 2.0 L GAS

2010 Dodge Caliber Intake Manifold Parts and Q&A

Q: How to Install an Intake Manifold on 2010 Dodge Caliber?
A: Before you install the intake manifold, all its gasket surfaces must be cleaned and replaced with the new gasket. Then, fit the intake manifold and screw the bolts until they reach 25 Nm (220 in. lbs.). Connect the fuel rail assembly to the intake manifold after that and tighten the bolts to 23 Nm (200 in. lbs.). Make sure to put on the fuel injector connectors as well. Check for any harm to the quick connect fittings and change them whenever required. Connect the fuel supply hose to the fuel rail assembly and check that it stays in place when you gently pull at the connector. Once more, join the negative battery terminal, place the coolant, put the air filter cabinet in and finish by installing the engine cover.