How to Remove and Replace an Intake Manifold on Dodge Caliber?

Before you take out and replace the intake manifold, release fuel system pressure and stay in a well-ventilated area that's not close to ignition sources. It's important to begin by removing the engine cover. After that, release the negative cable from the battery and take out the air cleaner inlet and housing. With the fuel line disconnected from the rail, then move on to the fuel injector wires. Unbolt the fuel rail to take it out. Remove the sensor for oil temperature, the variable valve timing solenoid electrical connector and the intake camshaft position sensor electrical connector, then put the harness aside. Take off the throttle body support bracket and remove the electrical connection. Remove the wiring harness retainer, unplug the MAP sensor wiring connector and disconnect the intake vacuum lines. Removal of the top radiator hose bracket, intake manifold bolts and manifold completes the job.

How to Install an Intake Manifold on Dodge Caliber?

Before installing the intake manifold, be sure to clean all gaskets and put in a new intake manifold gasket. After that, place the intake manifold and tighten its bolts to 25 Nm (220 in. lbs.). After that, bolt on the fuel rail assembly to the intake manifold using 23 Nm (200 in. lbs.) of force and attach the fuel injector electrical wires. Look for any harm on the quick connect fittings and install new ones if that's the case. Connect the fuel supply hose to the fuel rail assembly and pull the connector to make sure there is no looseness. Attach the battery negative cable once more, charge the cooling system, set the air cleaner housing and finish with the engine cover.

OEM Dodge Caliber Intake Manifold

Engine Intake Manifold

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Intake Manifolds found

View related parts
Dodge Caliber Intake Manifold Part Number: 4884495AK
$499.22 MSRP: $734.00
You Save: $234.78 (32%)
ADD TO CART
Product Specifications
- Other Name: Manifold - Intake; Engine Intake Manifold; Manifold Intake
- Replaces: 4884495AG, 4884495AF, 4884495AI, 4884495AE, 4884542AC, 4884495AH, 4884495AJ, 4884495AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2012 Dodge Caliber | R/T, Rush, SE, SXT, Uptown | 1.8L L4, 2.0L L4, 2.4L L4, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Dodge Caliber Intake Manifold Part Number: 4593915AB
$488.41 MSRP: $745.00
You Save: $256.59 (35%)
ADD TO CART
Product Specifications
- Other Name: Manifold - Intake; Engine Intake Manifold; Manifold Intake
- Replaces: 4593915AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2012 Dodge Caliber | Express, Heat, Mainstreet, SE, SXT, SXT Plus, Uptown | 2.0L L4, 4 Cyl 2.0 L GAS
View related parts
Dodge Caliber Intake Manifold Part Number: 4884881AF
Product Specifications
- Other Name: Manifold - Intake; Engine Intake Manifold
- Replaces: 4884881AD, 4884881AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2009 Dodge Caliber | SRT-4 | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Dodge Caliber Intake Manifold Part Number: 4884882AG
Product Specifications
- Other Name: Manifold - Intake; Engine Intake Manifold; Manifold Intake Includes All Items In The Box; Manifold Intake
- Replaces: 4884882AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010 Dodge Caliber | Express, Heat, Mainstreet, SE, SXT, Uptown | 4 Cyl 2.0 L GAS

Dodge Caliber Intake Manifold

Choose OEM Intake Manifold that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Intake Manifold follows strict manufacturing steps to lock in quality and fit. If your Dodge Caliber matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Caliber parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Dodge Caliber Intake Manifold is a very important part which plays an important role in optimizing the performance as well as efficiency of the Dodge Caliber cars that were manufactured from 2007 to 2012. This Intake Manifold is specifically aimed at enhancing the flow of air or air/fuel mixtures to the cylinder head intake port or ports which in similar dictate the power output and dynamism of the engine. The Dodge Caliber models such as the SE & SXT models are however products of this advanced method of construction seen from the replacement of the earlier cast iron and aluminum materials with lightweight plastics needed to address the issues of efficiency and heat. In particular, Dodge Caliber Intake Manifold includes the variable length that contributes to the optimal regulation of airflow depending on the load of the respective engine; at the same time, it provides stronger horsepower and impressive torque, as wells as identified fuel economy. This is important for the sustenance of Dodge Calibers reliability and safety standards especially as demonstrated by the insurance institute highway safety test results of the car. The part of the Intake Manifold on how they enhance the efficiency of an engine takes into consideration the vehicle's performance and also its safety system putting the device at vantage for automotive industries. Due to its universality in most Dodge Caliber models, the Intake Manifold is crucial to the driver who wishes to get the prime of his car. In conclusion, the Dodge Caliber Intake Manifold can be regarded as the embodiment of the concept of progressive ideas and performance improvement as a part of the Dodge brand, which guarantees the Caliber's popularity as a compact hatchback vehicle.

Dodge Caliber Intake Manifold Parts and Q&A

Intake Manifold
4884495AK
Q: How to Remove and Replace an Intake Manifold on Dodge Caliber?
A:
Before you take out and replace the intake manifold, release fuel system pressure and stay in a well-ventilated area that's not close to ignition sources. It's important to begin by removing the engine cover. After that, release the negative cable from the battery and take out the air cleaner inlet and housing. With the fuel line disconnected from the rail, then move on to the fuel injector wires. Unbolt the Fuel Rail to take it out. Remove the sensor for oil temperature, the variable valve timing solenoid electrical connector and the intake Camshaft Position Sensor electrical connector, then put the harness aside. Take off the throttle body support bracket and remove the electrical connection. Remove the wiring harness retainer, unplug the MAP Sensor wiring connector and disconnect the intake vacuum lines. Removal of the top radiator hose bracket, intake manifold bolts and manifold completes the job.
Intake Manifold
4884881AF
Q: How to Install an Intake Manifold on Dodge Caliber?
A:
Before installing the intake manifold, be sure to clean all gaskets and put in a new intake manifold gasket. After that, place the intake manifold and tighten its bolts to 25 Nm (220 in. lbs.). After that, bolt on the Fuel Rail assembly to the intake manifold using 23 Nm (200 in. lbs.) of force and attach the fuel injector electrical wires. Look for any harm on the quick connect fittings and install new ones if that's the case. Connect the fuel supply hose to the fuel rail assembly and pull the connector to make sure there is no looseness. Attach the battery negative cable once more, charge the cooling system, set the air cleaner housing and finish with the engine cover.