How to Maintain a Seat Heater Switch on 2010 Dodge Challenger?

To service the heated seat switch, disconnect and isolate the battery negative cable. Remove center bezel (2) from the instrument panel and unplug the heated seat switch electrical connector. From the back of bezel (2) squeeze the two tabs (3) at top and bottom and push switch (1) through.

OEM 2010 Dodge Challenger Seat Heater Switch

Seat Heater Level Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Seat Heater Switch found

View related parts
2010 Dodge Challenger Seat Heat Switch, Driver Side Part Number: 4602970AA
Product Specifications
- Other Name: Switch - Heated Seat; Seat Heater Switch, Left; Switch; Switch Heated Seat; Seat Heater Switch
- Position: Driver Side
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.7 x 2.6 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4602970AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Challenger Submodels:
- R/T, SE, SRT8 | 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS

2010 Dodge Challenger Seat Heater Switch Parts and Q&A

Q: How to Maintain a Seat Heater Switch on 2010 Dodge Challenger?
A: To service the heated seat switch, disconnect and isolate the battery negative cable. Remove center bezel (2) from the instrument panel and unplug the heated seat switch electrical connector. From the back of bezel (2) squeeze the two tabs (3) at top and bottom and push switch (1) through.