How to Replace a Deployed or Non-Deployed Passenger Air Bag on 2010 Dodge Challenger?

In a deployed passenger air bag, you need to change the top pad on the instrument panel. First, open the hood and detach the cable bringing the negative terminal to the battery. Wait at least two minutes to let the air bag system reserve capacitor discharge so the air bags won't accidentally go off and might hurt you. Take out the instrument panel and remove the electrical connector from the passenger air bag (3). Remove the four screws from the left and right of the passenger's seat and the two bolts underneath it next. Take the passenger air bag away from the instrument panel, look over all usable pieces and put them on the new instrument panel top pad. Remove all the powder inside the vehicle. If an aircraft does not deploy the passenger air bag, first break the connection of the battery's negative cable and wait two minutes. Eliminate the silencer pad on the right and disassemble the glove box assembly. The next step is to remove the two screws below the distribution duct, just to the left of the distribution housing (2), then remove the other two below the distribution duct (1). Disconnect the passenger air bag electrical connector (3) and remove the two bolts (2) that hold the passenger air bag assembly to the cross car beam. After that, work the passenger air bag down to remove any things that may prevent you from pulling it out.

OEM 2010 Dodge Challenger Air Bag

Air Bag Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Air Bags found

View related parts
2010 Dodge Challenger Driver Inflator Module, Gray, Driver Side Part Number: UW70XDVAG
$522.12 MSRP: $760.00
You Save: $237.88 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Airbagg - Driver; Steering Wheel Air Bag; Driver Air Bag; Module Air Bag Driver; Air Bag Driver
- Position: Driver Side
- Replaces: UW70XDVAF
- Item Weight: 3.10 Pounds
- Item Dimensions: 13.9 x 12.1 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: UW70XDVAG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Challenger Submodels:
- R/T, SE, SRT8 | 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2010 Dodge Challenger Inflator Curtain, Driver Side Part Number: 5108017AH
$678.99 MSRP: $990.00
You Save: $311.01 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Airbagg - Left Side; Curtain Air Bag, Left; Head Air Bag
- Position: Driver Side
- Replaces: 5108017AG, 5108017AC, 5108017AD, 5108017AE, 5108017AA, 5108017AF, 5108017AB
- Item Weight: 6.10 Pounds
- Item Dimensions: 10.1 x 9.9 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5108017AH
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Challenger Submodels:
- R/T, R/T Classic, R/T Plus, Rallye Redline, SE, SRT 392, SRT Hellcat, SRT8, SXT, SXT Plus, Scat Pack | 3.5L V6, 3.6L V6, 5.7L V8, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.1L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
2010 Dodge Challenger Inflator Curtain, Passenger Side Part Number: 5108016AH
$697.31 MSRP: $1015.00
You Save: $317.69 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Airbagg - Right Side; Curtain Air Bag, Right; Head Air Bag
- Position: Passenger Side
- Replaces: 5108016AD, 5108016AE, 5108016AC, 5108016AG, 5108016AF, 5108016AA, 5108016AB
- Item Weight: 6.50 Pounds
- Item Dimensions: 9.9 x 9.7 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5108016AH
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Challenger Submodels:
- R/T, R/T Classic, R/T Plus, Rallye Redline, SE, SRT 392, SRT Hellcat, SRT8, SXT, SXT Plus, Scat Pack | 3.5L V6, 3.6L V6, 5.7L V8, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.1L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
2010 Dodge Challenger Passenger Air Bag, Passenger Side Part Number: 5108873AJ
$1488.50 MSRP: $2175.00
You Save: $686.50 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Airbag - Passenger; Instrument Panel Air Bag; Passenger Inflator Module
- Position: Passenger Side
- Replaces: 5108873AC, 5108873AG, 5108873AI, 5108873AH, 5108873AB, 5108873AF, 5108873AA, 5108873AD, 5108873AE
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5108873AJ
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Challenger Submodels:
- R/T, R/T Classic, Rallye Redline, SE, SRT8, SXT, SXT Plus | 3.5L V6, 3.6L V6, 5.7L V8, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.1L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.4 L GAS

2010 Dodge Challenger Air Bag Parts and Q&A

Q: How to Replace a Deployed or Non-Deployed Passenger Air Bag on 2010 Dodge Challenger?
A: In a deployed passenger air bag, you need to change the top pad on the instrument panel. First, open the hood and detach the cable bringing the negative terminal to the battery. Wait at least two minutes to let the air bag system reserve capacitor discharge so the air bags won't accidentally go off and might hurt you. Take out the instrument panel and remove the electrical connector from the passenger air bag (3). Remove the four screws from the left and right of the passenger's seat and the two bolts underneath it next. Take the passenger air bag away from the instrument panel, look over all usable pieces and put them on the new instrument panel top pad. Remove all the powder inside the vehicle. If an aircraft does not deploy the passenger air bag, first break the connection of the battery's negative cable and wait two minutes. Eliminate the silencer pad on the right and disassemble the glove box assembly. The next step is to remove the two screws below the distribution duct, just to the left of the distribution housing (2), then remove the other two below the distribution duct (1). Disconnect the passenger air bag electrical connector (3) and remove the two bolts (2) that hold the passenger air bag assembly to the cross car beam. After that, work the passenger air bag down to remove any things that may prevent you from pulling it out.