How to Safely Service the Clock Spring in the Steering Column Control Module (SCCM) on 2010 Dodge Challenger?

To service the Steering Column Control Module (SCCM), remove the entire assembly so that you do not damage the Clock Spring pins, which may affect the airbag system. Center the Clock Spring, tighten it and re-install the SCCM. Do not connect the battery negative cable until after the system test to avoid serious injury.

OEM 2010 Dodge Challenger Clock Spring

Spiral Cable Clock Spring

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Clock Spring found

View related parts
2010 Dodge Challenger Clockspring Part Number: 68034898AB
$331.97 MSRP: $489.00
You Save: $157.03 (33%)
ADD TO CART
Product Specifications
- Other Name: Clockspring - Steering Column Control Mod; Air Bag Clockspring; Clockspring Steering Column Control Module
- Replaces: 68034898AA
- Item Weight: 1.10 Pounds
- Item Dimensions: 6.1 x 6.8 x 6.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68034898AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Challenger Submodels:
- R/T, SE, SRT8 | 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS

2010 Dodge Challenger Clock Spring Parts and Q&A

Q: How to Safely Service the Clock Spring in the Steering Column Control Module (SCCM) on 2010 Dodge Challenger?
A: To service the Steering Column Control Module (SCCM), remove the entire assembly so that you do not damage the Clock Spring pins, which may affect the airbag system. Center the Clock Spring, tighten it and re-install the SCCM. Do not connect the battery negative cable until after the system test to avoid serious injury.