How to Install a Thermostat on a 3.5L Engine on 2010 Dodge Challenger?

For a 3.5L engine, first put the gasket on the engine thermostat and inside the housing. Secure the thermostat housing, gasket and mounting bolts onto the block so that the bolts are tightened to 12 Nm (105 in. lbs.). Following that, install the radiator hose and the air box assembly. Full the cooling system and then lift the car on a hoist. Set in the belly pan and then secure the negative battery cable into place.

OEM 2010 Dodge Challenger Thermostat

Engine Coolant Thermostat

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Thermostat found

View related parts
2010 Dodge Challenger Thermostat Part Number: 52028898AJ
$69.58 MSRP: $91.75
You Save: $22.17 (25%)
ADD TO CART
Product Specifications
- Replaces: 52028898AE, 52028898AI
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52028898AJ
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2010 Dodge Challenger Submodels:
- 392 Hemi Scat Pack Shaker, R/T, R/T 392, R/T Classic, R/T Plus, R/T Plus Shaker, R/T Scat Pack, R/T Scat Pack Shaker Widebody, R/T Scat Pack Widebody, R/T Shaker, SRT 392, SRT Demon, SRT Demon 170, SRT Hellcat, SRT Hellcat Jailbreak, SRT Hellcat Redeye, SRT Hellcat Redeye Jailbreak, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, SRT Super Stock, SRT8, Scat Pack, Scat Pack 392 Widebody, T/A, T/A 392, T/A 392 Widebody | 5.7L V8, 6.1L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS

2010 Dodge Challenger Thermostat Parts and Q&A

Q: How to Install a Thermostat on a 3.5L Engine on 2010 Dodge Challenger?
A: For a 3.5L engine, first put the gasket on the engine thermostat and inside the housing. Secure the thermostat housing, gasket and mounting bolts onto the block so that the bolts are tightened to 12 Nm (105 in. lbs.). Following that, install the radiator hose and the air box assembly. Full the cooling system and then lift the car on a hoist. Set in the belly pan and then secure the negative battery cable into place.