How to Safely Remove and Replace an Intake Manifold on 2010 Dodge Grand Caravan?

Because the fuel system remains under pressure when the engine is off, you must let all the air out before you remove and install the lower intake manifold. Break the battery cable connecting the battery to the car, then drain the engine's cooling system. First, take out the EGR tube and upper intake manifold, then cut the fuel hose between the fuel rail and supply. After that, take out the ignition coil and its mounting bracket, turn off the heater supply hose and disconnect the Engine Coolant Temperature (ECT) sensor wire. Before removing the fuel injector electrical connectors, mark each one with the number of its cylinder. Unique to this make and model, come from OEM vendors and help you push smoke out of the engine compartment. Take away the upper radiator hose and after that, lift out two bolts, a nut and a bracket. First, unbolt the support bracket, bolt and bolts for the lower intake manifold. Deal with the intake manifold gasket gently, because it is made thin and can accidently injure someone. Once done, remove the lower intake manifold, pop out the intake manifold end seal retainer bolt and take out the intake manifold gasket. After that, check and clean the intake manifold.

OEM 2010 Dodge Grand Caravan Intake Manifold

Engine Intake Manifold

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Intake Manifolds found

View related parts
2010 Dodge Grand Caravan Intake Manifold, Upper Part Number: 4781578AP
$282.12 MSRP: $421.00
You Save: $138.88 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Plenum - Intake Manifold; Engine Intake Manifold, Upper; Intake Plenum Gasket; Plenum Gasket; Intake Plenum; Plenum; Plenum Intake Manifold See Important Note
- Position: Upper
- Replaces: 4781578AM, 4781578AL
- Item Weight: 6.00 Pounds
- Item Dimensions: 8.5 x 19.4 x 20.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4781578AP
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Grand Caravan Submodels:
- SXT | 3.8L V6, 6 Cyl 3.8 L GAS
View related parts
2010 Dodge Grand Caravan Intake Manifold, Lower Part Number: 4892233AB
Product Specifications
- Other Name: Manifold - Intake; Engine Intake Manifold, Lower; Manifold Intake
- Position: Lower
- Item Weight: 6.60 Pounds
- Item Dimensions: 22.2 x 11.3 x 6.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4892233AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Grand Caravan Submodels:
- SXT | 6 Cyl 4.0 L GAS
View related parts
2010 Dodge Grand Caravan Intake Manifold Part Number: 4781577AM
Product Specifications
- Other Name: Manifold - Intake Manifold; Plenum Intake Manifold See Important Note
- Replaces: 4781577AL
- Item Weight: 5.00 Pounds
- Item Dimensions: 17.5 x 15.8 x 9.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4781577AM
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Grand Caravan Submodels:
- C/V, SE | 3.3L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View related parts
2010 Dodge Grand Caravan Intake Manifold Part Number: 4781035AQ
Product Specifications
- Other Name: Manifold - Intake; Manifold Intake
- Replaces: 4781035AM, 4781035AL, 4781035AO
- Item Weight: 13.90 Pounds
- Item Dimensions: 21.0 x 20.2 x 8.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4781035AQ
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Grand Caravan Submodels:
- C/V, SE, SXT | 6 Cyl 3.3 L FLEX, 6 Cyl 3.8 L GAS
View related parts
2010 Dodge Grand Caravan Intake Manifold, Upper Part Number: 4593578AD
Product Specifications
- Other Name: Plenum - Intake Manifold; Engine Intake Manifold, Upper; Intake Plenum; Plenum; Plenum Intake Manifold
- Position: Upper
- Item Weight: 19.40 Pounds
- Item Dimensions: 25.3 x 24.5 x 10.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4593578AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Grand Caravan Submodels:
- SXT | 6 Cyl 4.0 L GAS

2010 Dodge Grand Caravan Intake Manifold Parts and Q&A

Q: How to Safely Remove and Replace an Intake Manifold on 2010 Dodge Grand Caravan?
A: Because the fuel system remains under pressure when the engine is off, you must let all the air out before you remove and install the lower intake manifold. Break the battery cable connecting the battery to the car, then drain the engine's cooling system. First, take out the EGR tube and upper intake manifold, then cut the fuel hose between the fuel rail and supply. After that, take out the ignition coil and its mounting bracket, turn off the heater supply hose and disconnect the Engine Coolant Temperature (ECT) sensor wire. Before removing the fuel injector electrical connectors, mark each one with the number of its cylinder. Unique to this make and model, come from OEM vendors and help you push smoke out of the engine compartment. Take away the upper radiator hose and after that, lift out two bolts, a nut and a bracket. First, unbolt the support bracket, bolt and bolts for the lower intake manifold. Deal with the intake manifold gasket gently, because it is made thin and can accidently injure someone. Once done, remove the lower intake manifold, pop out the intake manifold end seal retainer bolt and take out the intake manifold gasket. After that, check and clean the intake manifold.