How to Remove and Replace an Intake Manifold for Upper on 2009 Dodge Grand Caravan?

You should first disconnect and insulate the negative battery cable before replacing the upper intake manifold (3). Also, disconnect the IAT sensor from its cable and then take out the air inlet resonator from the throttle body hose. Draw the EVAP hose away from the throttle body and pull out the ETC wiring connector on the throttle body (1). Take out the brake booster hose from the intake manifold and unhook the Manifold Absolute Pressure (MAP) sensor electrical connector (1) and the PCV hose. Disconnect the EGR tube per the directions found in the service manual. Then, undo the intake manifold bolts (1) and get rid of the manifold (4). While the top part is taken out, cover the bottom intake manifold so no dirt gets inside. After that, clean and check the upper intake manifold.

OEM 2009 Dodge Grand Caravan Intake Manifold

Engine Intake Manifold

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Intake Manifolds found

View related parts
2009 Dodge Grand Caravan Intake Manifold, Upper Part Number: 4781578AP
$282.12 MSRP: $421.00
You Save: $138.88 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Plenum - Intake Manifold; Engine Intake Manifold, Upper; Intake Plenum Gasket; Plenum Gasket; Intake Plenum; Plenum; Plenum Intake Manifold See Important Note
- Position: Upper
- Replaces: 4781578AM, 4781578AL
- Item Weight: 6.00 Pounds
- Item Dimensions: 8.5 x 19.4 x 20.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4781578AP
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Grand Caravan Submodels:
- SXT | 3.8L V6, 6 Cyl 3.8 L GAS
View related parts
2009 Dodge Grand Caravan Intake Manifold, Lower Part Number: 4892233AB
Product Specifications
- Other Name: Manifold - Intake; Engine Intake Manifold, Lower; Manifold Intake
- Position: Lower
- Item Weight: 6.60 Pounds
- Item Dimensions: 22.2 x 11.3 x 6.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4892233AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Grand Caravan Submodels:
- SXT | 6 Cyl 4.0 L GAS
View related parts
2009 Dodge Grand Caravan Intake Manifold Part Number: 4781577AM
Product Specifications
- Other Name: Manifold - Intake Manifold; Plenum Intake Manifold See Important Note
- Replaces: 4781577AL
- Item Weight: 5.00 Pounds
- Item Dimensions: 17.5 x 15.8 x 9.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4781577AM
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Grand Caravan Submodels:
- C/V, SE | 3.3L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View related parts
2009 Dodge Grand Caravan Intake Manifold Part Number: 4781035AQ
Product Specifications
- Other Name: Manifold - Intake; Manifold Intake
- Replaces: 4781035AM, 4781035AL, 4781035AO
- Item Weight: 13.90 Pounds
- Item Dimensions: 21.0 x 20.2 x 8.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4781035AQ
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Grand Caravan Submodels:
- C/V, SE, SXT | 6 Cyl 3.3 L FLEX, 6 Cyl 3.8 L GAS
View related parts
2009 Dodge Grand Caravan Intake Manifold, Upper Part Number: 4593578AD
Product Specifications
- Other Name: Plenum - Intake Manifold; Engine Intake Manifold, Upper; Intake Plenum; Plenum; Plenum Intake Manifold
- Position: Upper
- Item Weight: 19.40 Pounds
- Item Dimensions: 25.3 x 24.5 x 10.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4593578AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Grand Caravan Submodels:
- SXT | 6 Cyl 4.0 L GAS

2009 Dodge Grand Caravan Intake Manifold Parts and Q&A

Q: How to Remove and Replace an Intake Manifold for Upper on 2009 Dodge Grand Caravan?
A: You should first disconnect and insulate the negative battery cable before replacing the upper intake manifold (3). Also, disconnect the IAT sensor from its cable and then take out the air inlet resonator from the throttle body hose. Draw the EVAP hose away from the throttle body and pull out the ETC wiring connector on the throttle body (1). Take out the brake booster hose from the intake manifold and unhook the Manifold Absolute Pressure (MAP) sensor electrical connector (1) and the PCV hose. Disconnect the EGR tube per the directions found in the service manual. Then, undo the intake manifold bolts (1) and get rid of the manifold (4). While the top part is taken out, cover the bottom intake manifold so no dirt gets inside. After that, clean and check the upper intake manifold.