How to Replace a Fog Light Bulb on 2010 Jeep Liberty?

When replacing your front fog lamp bulb, first unconnect and remove the battery negative cable to ensure your safety. Following that, disconnect the wire harness connector from the connector receptacle on the back side of the front fog lamp bulb inside the front lamp unit housing. Squeeze the base of the bulb, slant it a bit in a counterclockwise motion and then fully pull it and the bulb straight from the keyed section of the fixture. Avoid talking with your fingers to the bulb or placing it on oily surfaces because that can decrease its lifespan.

OEM 2010 Jeep Liberty Fog Light Bulb

Fog Lamp Bulb

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Fog Light Bulb found

View related parts
2010 Jeep Liberty Fog Lamp Bulb, Front Part Number: L0009145
$24.74 MSRP: $36.50
You Save: $11.76 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bulb; Fog Light Bulb, Front; Fog Light Bulbs; Car Bulbs; Bulb Fog Lamp 50 Watt; Bulb 9145 Fog Lamp; Bulb 9145
- Position: Front
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.9 x 2.0 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: L0009145
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Jeep Liberty Submodels:
- 65th Anniversary Edition, Jet, Limited, Renegade, Rocky Mountain Edition, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS

2010 Jeep Liberty Fog Light Bulb Parts and Q&A

Q: How to Replace a Fog Light Bulb on 2010 Jeep Liberty?
A: When replacing your front fog lamp bulb, first unconnect and remove the battery negative cable to ensure your safety. Following that, disconnect the wire harness connector from the connector receptacle on the back side of the front fog lamp bulb inside the front lamp unit housing. Squeeze the base of the bulb, slant it a bit in a counterclockwise motion and then fully pull it and the bulb straight from the keyed section of the fixture. Avoid talking with your fingers to the bulb or placing it on oily surfaces because that can decrease its lifespan.