How to Install a Clutch Slave Cylinder on 2010 Jeep Wrangler?

To install the clutch slave cylinder, you need to put it in the location of transmission, the hydraulic line is attached with the bracket, make the O-ring is present. Secure and tighten the slave cylinder nuts to 23 Nm (17 ft. lbs.) then bleed the hydraulic system to complete installation.

OEM 2010 Jeep Wrangler Clutch Slave Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Clutch Slave Cylinder found

View related parts
2010 Jeep Wrangler Slave Cylinder Part Number: 52060133AE
$112.62 MSRP: $171.00
You Save: $58.38 (35%)
ADD TO CART
Product Specifications
- Other Name: Cylinder - Clutch Slave
- Replaces: 52060133AD, 52060133AC, 52060133AB
- Item Dimensions: 9.5 x 5.0 x 2.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52060133AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Jeep Wrangler Submodels:
- 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S, Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S, Unlimited X, X, X-S | 3.6L V6, 3.8L V6, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS

2010 Jeep Wrangler Clutch Slave Cylinder Parts and Q&A

Q: How to Install a Clutch Slave Cylinder on 2010 Jeep Wrangler?
A: To install the clutch slave cylinder, you need to put it in the location of transmission, the hydraulic line is attached with the bracket, make the O-ring is present. Secure and tighten the slave cylinder nuts to 23 Nm (17 ft. lbs.) then bleed the hydraulic system to complete installation.