Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2010 Jeep Wrangler Submodels:
70th Anniversary, Rubicon, Sahara, Sport, Unlimited 70th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited X, X | 3.8L V6, 6 Cyl 3.8 L GAS
2010 Jeep Wrangler Muffler Parts and Q&A
Q: How to Install a Muffler for Optimal Performance on 2010 Jeep Wrangler?
A: Set aside the blanking plugs and secure the tailpipe assembly into the car before placing the hangers inside the insulators. Following that, line up the exhaust pipe 4 and the muffler and tailpipe assembly 1 so that both are correctly placed and have at least 25mm (1 inch) clearance between them. Turn the wrench until the clamp joining muffler and tailpipe assembly 1 to exhaust pipe 4 reaches a force of 28 Nm (21 ft. lbs.). After finishing the air suspension setup, fire up the engine and examine for leaks in the exhaust, making the required repairs. After that, look at the exhaust system and make sure it is not touching any body panels; then, fix any problems if needed.