How to install a Brake Master Cylinder Reservoir on Chrysler 300?

You should start by putting the new brake fluid reservoir sealing grommets inside the master cylinder housing while installing the brake master cylinder reservoir. Drizzle clean brake fluid on the surface where the reservoir attaches and align the reservoir with the sealing grommets. Rock and push it down at the same time until the reservoir is set in place. After the hole is drilled, check that the top of both sealing grommets is in contact with the fluid reservoir. After that, add the reservoir mount screw and torque it to 28 Nm or 250 in. lbs. The wiring arrives at the fluid sensor mounted inside the brake fluid reservoir. Place clean and fresh Mopar(R) Brake Fluid or an alternative into the master cylinder reservoir. After that, put in the access panel over the cowl at the top of the engine. Before starting the vehicle, you need to feel a firm brake pedal; if that doesn't happen, drain and recheck the brake system for any leaks. Check the brakes by taking the vehicle out on a short trip.

OEM Chrysler 300 Brake Master Cylinder Reservoir

Brake Fluid Storage Tank

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Brake Master Cylinder Reservoirs found

View related parts
Chrysler 300 Master Cylinder Part Number: 68048549AB
$42.08 MSRP: $62.60
You Save: $20.52 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Reservoir - Brake Master Cylinder; Brake Master Cylinder Reservoir; Brake Reservoir; Master Cylinder Reservoir; Reservoir; Reservoir Brake Master Cylinder; Brake Master Cylinder
- Replaces: 68048549AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2023 Chrysler 300 | Base, C, C Luxury, C Platinum, C SRT8, LX, Limited, S, SRT8, SRT8 Core, Signature Series, Touring, Touring L | 2.7L V6, 3.5L V6, 3.6L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.1L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.4 L GAS
View related parts
Chrysler 300 Reservoir Part Number: 5139150AA
Product Specifications
- Other Name: Reservoir - Brake Master Cylinder; Brake Master Cylinder Reservoir; Reservoir Brake Master Cylinder
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2007 Chrysler 300 | Base, C, C SRT8, Limited, Touring | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Chrysler 300 Master Cylinder Reservoir Part Number: 68033787AA
Product Specifications
- Other Name: Reservoir - Brake Master Cylinder; Brake Master Cylinder Reservoir; Reservoir; Reservoir Brake Master Cylinder
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008 Chrysler 300 | C, C SRT8, LX, Limited, Touring | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS

Chrysler 300 Brake Master Cylinder Reservoir

Choose OEM Brake Master Cylinder Reservoir that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Brake Master Cylinder Reservoir follows strict manufacturing steps to lock in quality and fit. If your Chrysler 300 matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine 300 parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Brake Master Cylinder Reservoir for Chrysler 300 serves as an essential element which enables reliable performance of these vehicles. The reservoir operates as a fluid storage system to maintain clean fluid at suitable levels for achieving efficient braking operations. The Chrysler 300 Brake Master Cylinder Reservoir suits all models from base through Touring to Limited through 300C and SRT-8 vehicles within the 300 lineup thus providing diversity for Chrysler car owners. The two-part safety design of this system allows one circuit to operate and provide pressure when the other becomes nonfunctional which proves vital for dangerous situations. The reservoir features durable nylon or plastic material in addition to requiring O-rings for sealing the unit to avoid leakage which can lower braking performance. Maintenance of the Chrysler 300 Brake Master Cylinder Reservoir should be conducted regularly because neglect can lead to both seal deterioration and moisture contamination. Each model variant among Chrysler 300 series uses reservoir caps that are designed with single-threading or multiple threaded configurations. The detailed design of this system helps make Chrysler car vehicles safer while building the model's recognition as both reliable and high-performance in the automotive sector. For drivers the the automaker model Brake Master Cylinder Reservoir serves as a key part in the braking system which helps maintain operational safety and system efficiency.

Chrysler 300 Brake Master Cylinder Reservoir Parts and Q&A

Master Cylinder
68048549AB
Q: How to install a Brake Master Cylinder Reservoir on Chrysler 300?
A:
You should start by putting the new brake fluid reservoir sealing grommets inside the master cylinder housing while installing the brake master cylinder reservoir. Drizzle clean brake fluid on the surface where the reservoir attaches and align the reservoir with the sealing grommets. Rock and push it down at the same time until the reservoir is set in place. After the hole is drilled, check that the top of both sealing grommets is in contact with the fluid reservoir. After that, add the reservoir mount screw and torque it to 28 Nm or 250 in. lbs. The wiring arrives at the fluid sensor mounted inside the brake fluid reservoir. Place clean and fresh Mopar(R) Brake Fluid or an alternative into the master cylinder reservoir. After that, put in the access panel over the cowl at the top of the engine. Before starting the vehicle, you need to feel a firm brake pedal; if that doesn't happen, drain and recheck the brake system for any leaks. Check the brakes by taking the vehicle out on a short trip.