How to remove the rear Bumper Cover on Chrysler 300?

To remove the rear bumper fascia, first raise and support the vehicle. Next, take out the three push-pin retainers that secure each rear wheel house splash shield to the rear fascia assembly. Then, remove the screw that secures the rear fascia assembly to the nut insert in each quarter panel. Partially lower the vehicle and remove the push-pin retainers (three for sedan, three for wagon, one for Charger) that secure the rear fascia assembly to the decklid sill. On all models, take out the two deck lid bumper stops. Carefully pull the rear fascia assembly rearward to disengage the two push-pin retainers from the slots on each side of the fascia, allowing access to the license lamp and park assist. If equipped, disconnect the park assist sensor wire harness connector from the tail lamp wire harness connector and remove the rear fascia assembly from the vehicle. If necessary, remove the park assist sensors from the rear fascia assembly. For SRT8 models, if required, remove the lower fascia from the rear fascia assembly and discard the metal retaining clips. If needed, remove and discard the nut insert from each quarter panel and take out the two push-pin retainers.

How to install a rear Bumper Cover (fascia) on Chrysler 300?

To install the rear bumper cover or fascia, begin by installing the two push-pin retainers and a new nut insert into each quarter panel if they were removed. For SRT8 models, attach the lower fascia to the rear fascia assembly using new metal retaining clips if it was removed. If equipped, install the park assist sensors into the rear fascia assembly. Position the rear fascia assembly onto the vehicle and connect the license plate lamp and park assist wire harness connector if equipped. Engage the two push-pin retainers into the slots on each side of the rear fascia assembly by pushing the fascia forward. Install the push-pin retainers that secure the rear fascia assembly to the decklid sill, using three for sedan and wagon models and one for the charger. For sedan models, install the two bumper stops. Raise and support the vehicle, then install the screws that secure the rear fascia assembly to the nut insert in each quarter panel, tightening them securely. Position each rear wheel house splash shield to the rear fascia assembly and install the push-pin retainers. Finally, lower the vehicle.

OEM Chrysler 300 Bumper Cover

Bumper Shell

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

30 Bumper Covers found

View related parts
Chrysler 300 Bumper Cover, Front Part Number: 68127939AE
$294.13 MSRP: $526.00
You Save: $231.87 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia - Front; Bumper Cover, Front; Fascia Front Primed
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2012-2014 Chrysler 300 | Base, C, C Luxury, Limited, S, SRT8, SRT8 Core | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Chrysler 300 Bumper Cover, Front Part Number: 4805773AD
$406.64 MSRP: $614.00
You Save: $207.36 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia - Front; Bumper Cover, Front
- Position: Front
- Replaces: 4805773AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2010 Chrysler 300 | Limited, Signature Series, Touring | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6.1L V8
View related parts
Chrysler 300 Bumper Cover, Front Part Number: 5PN42TZZAE
$410.15 MSRP: $730.00
You Save: $319.85 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia - Front; Bumper Cover, Front; Fascia Front Primed
- Position: Front
- Replaces: 5PN42LXTAE, 5PN42TZZAC, 5PN42TZZAD, 5PN42KBXAE, 5PN42TZZAB, 5PN42GW7AE, 5PN42JRYAE, 5PN42KARAE, 5PN42JWDAE, 5PN42DX8AE, 5PN42KGZAE, 5PN42NRVAE, 5PN42JSCAE, 5PN42LAUAE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2023 Chrysler 300 | C, C Platinum, Limited, S, Touring, Touring L | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Chrysler 300 Bumper Cover, Rear Part Number: 4805780AC
$226.60 MSRP: $334.00
You Save: $107.40 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia - Rear; Bumper Cover, Rear
- Position: Rear
- Replaces: 4805780AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2006 Chrysler 300 | C | 5.7L V8, 8 Cyl 5.7 L GAS
View related parts
Chrysler 300 Bumper Cover, Rear Part Number: 5029904AB
$246.99 MSRP: $364.00
You Save: $117.01 (33%)
ADD TO CART
Product Specifications
- Other Name: Fascia - Rear; Bumper Cover, Rear
- Position: Rear
- Replaces: 5029904AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2006 Chrysler 300 | C SRT8 | 6.1L V8, 8 Cyl 6.1 L GAS
View related parts
Chrysler 300 Bumper Cover, Rear Part Number: 4806062AB
$288.92 MSRP: $425.00
You Save: $136.08 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia - Rear; Bumper Cover, Rear; Fascia Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2006 Chrysler 300 | Base, Limited | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler 300 Bumper Cover, Rear Part Number: 4805777AB
$297.98 MSRP: $439.00
You Save: $141.02 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia - Rear; Bumper Cover, Rear; Fascia Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2007 Chrysler 300 | C SRT8, Touring | 6 Cyl 3.5 L GAS, 8 Cyl 6.1 L GAS
View related parts
Chrysler 300 Bumper Cover, Rear Part Number: 68127950AC
$365.26 MSRP: $533.00
You Save: $167.74 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia - Rear; Bumper Cover, Rear; Fascia Rear
- Position: Rear
- Replaces: 68127950AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2014 Chrysler 300 | Base, C, C Luxury, Limited, S, SRT8, SRT8 Core | 3.6L V6, 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Chrysler 300 Bumper Cover, Rear Part Number: 4805779AD
$311.58 MSRP: $459.00
You Save: $147.42 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia - Rear; Bumper Cover, Rear; Fascia Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2010 Chrysler 300 | C, S | 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chrysler 300 Fascia - Front Part Number: 5RB50TZZAD
$367.36 MSRP: $533.00
You Save: $165.64 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: FASCIA-FRONT
- Position: Front
- Replaces: 5RB50KBXAD, 5RB50JWDAD, 5RB50GW7AD, 5RB50JSCAD, 5RB50JRYAD, 5RB50DX8AD, 5RB50LAUAD, 5RB50TZZAC, 5RB50KARAD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017-2023 Chrysler 300 | C, C Platinum, Limited, S, Touring, Touring L | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Chrysler 300 Bumper Cover, Rear Part Number: 4806062AC
$504.95 MSRP: $735.00
You Save: $230.05 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia - Rear; Bumper Cover, Rear; Fascia Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007 Chrysler 300 | Base, Limited | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler 300 Bumper Cover, Rear Part Number: 4805777AC
$377.85 MSRP: $550.00
You Save: $172.15 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia - Rear; Bumper Cover, Rear; Fascia Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler 300 | C SRT8, Signature Series, Touring | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 6.1 L GAS
View related parts
Chrysler 300 Bumper Cover, Front Part Number: 4805774AD
$377.85 MSRP: $550.00
You Save: $172.15 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia - Front; Bumper Cover, Front
- Position: Front
- Replaces: 4805774AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2010 Chrysler 300 | C, S | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS
View related parts
Chrysler 300 Bumper Cover, Rear Part Number: 5PN47TZZAD
$487.58 MSRP: $707.00
You Save: $219.42 (32%)
ADD TO CART
Product Specifications
- Other Name: Fascia - Rear; Bumper Cover, Rear; Fascia Rear Primed
- Position: Rear
- Replaces: 5PN47DX8AD, 5PN47GW7AD, 5PN47JRYAD, 5PN47LAUAD, 5PN47KBXAD, 5PN47NRVAD, 5PN47TZZAC, 5PN47KGZAD, 5PN47LXTAD, 5PN47JWDAD, 5PN47JSCAD, 5PN47KARAD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2023 Chrysler 300 | C, C Platinum, Limited, S, Touring, Touring L | 3.6L V6, 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Chrysler 300 Bumper Cover, Rear Part Number: 5PN46TZZAD
$487.58 MSRP: $707.00
You Save: $219.42 (32%)
ADD TO CART
Product Specifications
- Other Name: Fascia - Rear; Bumper Cover, Rear; Fascia Rear Primed
- Position: Rear
- Replaces: 5PN46DX8AD, 5PN46NRVAD, 5PN46KARAD, 5PN46JWDAD, 5PN46KGZAD, 5PN46GW7AD, 5PN46KBXAD, 5PN46LAUAD, 5PN46JRYAD, 5PN46TZZAC, 5PN46JSCAD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2023 Chrysler 300 | C, C Platinum, Limited, S, Touring, Touring L | 3.6L V6, 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Chrysler 300 Bumper Cover, Front Part Number: 5PN41TZZAE
$502.47 MSRP: $730.00
You Save: $227.53 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia - Front; Bumper Cover, Front; Fascia Front Primed
- Position: Front
- Replaces: 5PN41LXTAE, 5PN41TZZAD, 5PN41LAUAE, 5PN41JSCAE, 5PN41GW7AE, 5PN41NRVAE, 5PN41KARAE, 5PN41JRYAE, 5PN41KBXAE, 5PN41JWDAE, 5PN41DX8AE, 5PN41KGZAE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2023 Chrysler 300 | C, C Platinum, Limited, S, Touring, Touring L | 3.6L V6, 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Chrysler 300 Bumper Cover, Rear Part Number: 68027860AA
$853.03 MSRP: $1245.00
You Save: $391.97 (32%)
ADD TO CART
Product Specifications
- Other Name: Fascia - Rear; Bumper Cover, Rear; Fascia Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008 Chrysler 300 | LX, Limited | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler 300 Bumper Cover, Front Part Number: 5030576AB
$627.46 MSRP: $914.00
You Save: $286.54 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia - Front; Bumper Cover, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2007 Chrysler 300 | C SRT8 | 8 Cyl 6.1 L GAS
View related parts
Chrysler 300 Bumper Cover, Rear Part Number: 68034257AA
$840.29 MSRP: $949.00
You Save: $108.71 (12%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia - Rear; Bumper Cover, Rear; Fascia Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Chrysler 300 | LX, Limited | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler 300 Bumper Cover, Front Part Number: 68127938AE
$415.64 MSRP: $607.00
You Save: $191.36 (32%)
Product Specifications
- Other Name: Fascia - Front; Bumper Cover, Front; Fascia Front Primed
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2012-2014 Chrysler 300 | Base, C, C Luxury, Limited, S, SRT8, SRT8 Core | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS

| Page 1 of 2 |Next >

1-20 of 30 Results

Chrysler 300 Bumper Cover

Choose OEM Bumper Cover that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Bumper Cover follows strict manufacturing steps to lock in quality and fit. If your Chrysler 300 matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine 300 parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Chrysler 300 Bumper Cover is the soft outer covering that hides the hard bumper. This auto part helps complete the look of the sedan. Furthermore, it helps the airflow around the nose for possible speed and fuel-economy gains. The Bumper Cover is designed to absorb minor contact and protect parts beneath it from damage. It is shaped with cavities designed to hold fog lights, parking lamps, turn signals, or decorative inserts when those lights are not utilized. When it comes to the Chrysler 300, openings in the panel also direct air to the radiator, oil coolers, or brakes, while the removable cap can conceal the tow eye anchor for recovery. The Bumper Cover typically comes by itself, with the inserts or covers as separate purchases. It works with grilles, trim rings, and bezels because the bumper assembly is made of various parts. The Bumper Cover becomes damaged due to weather, UV exposure, and road debris. An intact replacement restores the promised protection and appearance on a Chrysler 300. Any Chrysler 300 owner will find a properly mounted Bumper Cover completes the front or rear profile while maintaining the Chrysler-designed protection expected from their vehicles.

Chrysler 300 Bumper Cover Parts and Q&A

Bumper Cover, Rear
4805777AC
Q:
How to remove the rear Bumper Cover on Chrysler 300?
A:
To remove the rear bumper fascia, first raise and support the vehicle. Next, take out the three push-pin retainers that secure each rear wheel house splash shield to the rear fascia assembly. Then, remove the screw that secures the rear fascia assembly to the nut insert in each quarter panel. Partially lower the vehicle and remove the push-pin retainers (three for sedan, three for wagon, one for Charger) that secure the rear fascia assembly to the decklid sill. On all models, take out the two deck lid bumper stops. Carefully pull the rear fascia assembly rearward to disengage the two push-pin retainers from the slots on each side of the fascia, allowing access to the license lamp and park assist. If equipped, disconnect the park assist sensor wire harness connector from the tail lamp wire harness connector and remove the rear fascia assembly from the vehicle. If necessary, remove the park assist sensors from the rear fascia assembly. For SRT8 models, if required, remove the lower fascia from the rear fascia assembly and discard the metal retaining clips. If needed, remove and discard the nut insert from each quarter panel and take out the two push-pin retainers.
Bumper Cover, Rear
4805777AB
Q:
How to install a rear Bumper Cover (fascia) on Chrysler 300?
A:
To install the rear bumper cover or fascia, begin by installing the two push-pin retainers and a new nut insert into each quarter panel if they were removed. For SRT8 models, attach the lower fascia to the rear fascia assembly using new metal retaining clips if it was removed. If equipped, install the park assist sensors into the rear fascia assembly. Position the rear fascia assembly onto the vehicle and connect the license plate lamp and park assist wire harness connector if equipped. Engage the two push-pin retainers into the slots on each side of the rear fascia assembly by pushing the fascia forward. Install the push-pin retainers that secure the rear fascia assembly to the decklid sill, using three for sedan and wagon models and one for the charger. For sedan models, install the two bumper stops. Raise and support the vehicle, then install the screws that secure the rear fascia assembly to the nut insert in each quarter panel, tightening them securely. Position each rear wheel house splash shield to the rear fascia assembly and install the push-pin retainers. Finally, lower the vehicle.