How to Service and Repair the Left Exhaust Manifold on Chrysler 300?

Before servicing or fixing the left exhaust manifold, remove the negative battery cable in the trunk and the intake air temperature sensor connector. Take off the air cleaner housing assembly, oil dipstick tube and the oxygen sensor. After, undo the heat shields and use a hoist to pick the vehicle up. Get rids of the connector from the downstream oxygen sensor and take off the exhaust pipe from the manifold. Take out the exhaust manifold attaching bolts, then remove the manifold. Inspect the manifold for cracks, measure its flatness and check the gasket for any unusual appearance. Check for distortion on the cylinder head mounting surface by using both a straightedge and thickness gauge. To complete the install, join the negative battery cable, raise the vehicle as before and add the gasket and manifold, tightening the bolts in the center first and moving outward to 23 Nm (200 inch lbs.). Once done, put back on the lower and upper heat shields and attach the fasteners to 28 Nm (250 inch lbs.), then slot in the exhaust pipes and the downstream oxygen sensor connectors. Drop the vehicle, install the oxygen sensor, fasten its electricity connector and lastly reattach the negative cable to the battery.

How to Remove and Replace the Left Exhaust Manifold on Chrysler 300?

Right before changing the left exhaust manifold, you should disconnect the negative battery cable. Jack up your vehicle and put the exhaust manifold in place while installing the gasket. Afterward, screw the bolts in the middle and tighten them all until they reach 23 Nm (200 in. lbs.). After that, put in the lower heat shield manifold and the upper heat shield, secure them with 28 Nm (250 in. lbs.) of torque. Hook up the exhaust system to the manifolds, attach the sensors to the downstream pipes and lift the vehicle. Once you're done, put the oxygen sensor in place and attach the electrical connector and again connect the negative battery cable.

OEM Chrysler 300 Exhaust Manifold

Engine Exhaust Manifold

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Exhaust Manifolds found

View related parts
Chrysler 300 Exhaust Manifold, Passenger Side Part Number: 53013848AG
$227.73 MSRP: $339.00
You Save: $111.27 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Right; Manifold Exhaust
- Position: Passenger Side
- Replaces: 53013848AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2023 Chrysler 300 | C, C Luxury, C Platinum, S | 5.7L V8, 8 Cyl 5.7 L GAS
View related parts
Chrysler 300 Exhaust Manifold, Driver Side Part Number: 53013849AE
$217.54 MSRP: $324.00
You Save: $106.46 (33%)
ADD TO CART
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Left; Manifold Exhaust
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2023 Chrysler 300 | C, C Luxury, C Platinum, S | 8 Cyl 5.7 L GAS
View related parts
Chrysler 300 Exhaust Manifold, Driver Side Part Number: 4792779AA
$191.98 MSRP: $355.00
You Save: $163.02 (46%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Left; Manifold Exhaust
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2010 Chrysler 300 | Limited, S, Signature Series, Touring | 6 Cyl 3.5 L GAS
View related parts
Chrysler 300 Exhaust Manifold, Passenger Side Part Number: 4792778AA
$284.38 MSRP: $423.00
You Save: $138.62 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Right; Manifold Exhaust
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2010 Chrysler 300 | Limited, S, Signature Series, Touring | 6 Cyl 3.5 L GAS
View related parts
Chrysler 300 Exhaust Manifold, Passenger Side Part Number: 5038756AC
$801.13 MSRP: $1225.00
You Save: $423.87 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Right
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2023 Chrysler 300 | C | 8 Cyl 6.4 L GAS
View related parts
Chrysler 300 Exhaust Manifold, Driver Side Part Number: 5038757AC
$819.91 MSRP: $1250.00
You Save: $430.09 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Left
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2023 Chrysler 300 | C | 8 Cyl 6.4 L GAS
View related parts
Chrysler 300 Exhaust Manifold, Driver Side Part Number: 5037633AF
$929.05 MSRP: $1310.00
You Save: $380.95 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Left; Manifold Exhaust
- Position: Driver Side
- Replaces: 5037633AD, 5037633AB, 5037633AC, 5037633AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2012-2014 Chrysler 300
- 2005-2010 Chrysler 300 | 6.1L V8
View related parts
Chrysler 300 Exhaust Manifold, Passenger Side Part Number: 5037632AF
$957.45 MSRP: $1360.00
You Save: $402.55 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Right; Manifold Exhaust
- Position: Passenger Side
- Replaces: 5037632AE, 5037632AC, 5037632AB, 5037632AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2012-2014 Chrysler 300
- 2005-2010 Chrysler 300 | 6.1L V8
View related parts
Chrysler 300 Exhaust Manifold, Driver Side Part Number: 4792771AC
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Left; Manifold Exhaust
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2008 Chrysler 300 | C | 8 Cyl 5.7 L GAS
View related parts
Chrysler 300 Exhaust Manifold, Passenger Side Part Number: 4792770AC
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Right; Manifold Exhaust
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2008 Chrysler 300 | C | 8 Cyl 5.7 L GAS
View related parts
Chrysler 300 Exhaust Manifold, Passenger Side Part Number: 4792762AB
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Left, Right; Manifold Exhaust
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2010 Chrysler 300 | Base, LX, Touring | 6 Cyl 2.7 L GAS
View related parts
Chrysler 300 Exhaust Manifold, Driver Side Part Number: 4792763AA
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Left, Right; Manifold Exhaust
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2010 Chrysler 300 | Base, LX, Touring | 6 Cyl 2.7 L GAS

Chrysler 300 Exhaust Manifold

Choose OEM Exhaust Manifold that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Exhaust Manifold follows strict manufacturing steps to lock in quality and fit. If your Chrysler 300 matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine 300 parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Exhaust Manifold of Chrysler 300 is particularly vital in channeling hot flames from the automobiles' engine to the exhaust mechanism in order to enhance its performance and minimize emission of dangerous gases. Located anywhere between the sides of the engine block, the manifold is created to avoid intake reversion which disrupts air flow and ultimately decrease the performance of an engine. Exhaust manifold types used in Chrysler 300 models varies and usually are cast iron or stainless steel parts. There are modifications which are called headers that improve the performance by minimizing the flow restriction and maximizing the velocity of the exhaust gases. These differences can be clearly observed in the material and design of the exhaust manifolds which in turn do manifest on the performances of the vehicle in terms of the power that it can deliver as well as the efficiency it can harness from the same power. This is why periodic checks and timely repair or replacement of a damaged exhaust manifold plays a critical role in keeping the car's performance optimum and the occupants of the car from any adverse health effects from exhaust gasses.

Chrysler 300 Exhaust Manifold Parts and Q&A

Exhaust Manifold, Driver Side
4792771AC
Q: How to Service and Repair the Left Exhaust Manifold on Chrysler 300?
A:
Before servicing or fixing the left exhaust manifold, remove the negative Battery Cable in the trunk and the intake air temperature sensor connector. Take off the air cleaner housing assembly, oil dipstick tube and the Oxygen Sensor. After, undo the heat shields and use a hoist to pick the vehicle up. Get rids of the connector from the downstream oxygen sensor and take off the exhaust pipe from the manifold. Take out the exhaust manifold attaching bolts, then remove the manifold. Inspect the manifold for cracks, measure its flatness and check the gasket for any unusual appearance. Check for distortion on the cylinder head mounting surface by using both a straightedge and thickness gauge. To complete the install, join the negative battery cable, raise the vehicle as before and add the gasket and manifold, tightening the bolts in the center first and moving outward to 23 Nm (200 inch lbs.). Once done, put back on the lower and upper heat shields and attach the fasteners to 28 Nm (250 inch lbs.), then slot in the exhaust pipes and the downstream oxygen sensor connectors. Drop the vehicle, install the oxygen sensor, fasten its electricity connector and lastly reattach the negative cable to the battery.
Exhaust Manifold, Driver Side
53013849AE
Q: How to Remove and Replace the Left Exhaust Manifold on Chrysler 300?
A:
Right before changing the left exhaust manifold, you should disconnect the negative Battery Cable. Jack up your vehicle and put the exhaust manifold in place while installing the gasket. Afterward, screw the bolts in the middle and tighten them all until they reach 23 Nm (200 in. lbs.). After that, put in the lower heat shield manifold and the upper heat shield, secure them with 28 Nm (250 in. lbs.) of torque. Hook up the exhaust system to the manifolds, attach the sensors to the downstream pipes and lift the vehicle. Once you're done, put the Oxygen Sensor in place and attach the electrical connector and again connect the negative battery cable.