OEM Chrysler 300M Windshield Washer Nozzle

Chrysler 300M Windshield Washer Nozzle Parts and Q&A

• Nozzle
  4805072AD
  Q: How to Adjust the Windshield Washer Nozzle Spray on Chrysler 300M?

  A:

  Both side nozzles on the windshield washer spray have adjustable juts that can each be set to three different positions. It is important that the inside of the jet is not damaged during adjustment and that engine exhaust is ventilated properly. You can modify the pattern of the spray by moving the safety pins in each nozzle. Whenever you finish an adjustment, switch on the washer system from within the car to see the pattern of the spray. You need to check the spray pattern while the engine is only idling. Two washers mounted on top of the hood spray three swift streams into the wiper line and if you're not satisfied, you can fix the pattern by inserting a safety pin into the nozzle ball. There is no difference in design between the right and left nozzles.
• Nozzle, Front Driver Side
  4805466AB
  Q: How to Replace a Windshield Washer Nozzle on Chrysler 300M?

  A:

  To remove the washer spray nozzle, first slide a plastic body filler spreader-or an equivalent tool such as a credit card-under the front of the nozzle, being careful not to damage the hood seal beneath it. Gently move the nozzle from side to side to free it from the hood panel, then position it so that you can pull it away far enough to unlatch the hose. During installation, reconnect the washer hose and align the nozzle over the hood opening, then press it firmly onto the opening and snap it securely in place. Having reconnected the hose, verify proper system operation and test for leak-free connections by activating the washer system switch from the cabin.